Printable Version of Topic

Posted by: mmichalik Jan 19 2021, 04:10 PM

Hi Everyone,
I have a new full set of dual EMPI HPMX 40 idf carbs.
I've owned them for 3 years or so, bought from Auto Atlanta, but they have never been run.
I've attached a few pictures and have more and can take some more if anyone wants to see them.
I'm asking $495.00 for the pair, plus shipping in the U.S.
Feel free to PM me if you're interested.
Thanks,
Mike


Attached thumbnail(s)

Posted by: Tdskip Jan 19 2021, 04:19 PM

So these have a vacuum advance provision? If so interested (please).

Edit - interested means I’ll buy them.

Posted by: mmichalik Jan 19 2021, 04:59 PM

@http://www.914world.com/bbs2/index.php?showuser=21666
Here's a picture of the other side of the carbs.
Let me know what you think



Attached thumbnail(s)

Posted by: Tdskip Jan 19 2021, 05:20 PM

Thanks Mike, don’t think they do, would need to be drilled just like the ones I currently have.

Nice set at a good price, someone without a vacuum advance distributor will grab them.

Posted by: Tdskip Jan 19 2021, 05:22 PM

Just to be sure can you please check the other carb, I might. My other set did but only on one side.

Posted by: mmichalik Jan 19 2021, 06:29 PM

Checked and the other carb is identical.
Thanks for inquiring about them though.

Still available for anyone else.

Posted by: Ansbacher Jan 19 2021, 07:04 PM

Drilling them out to accommodate for vacuum is easy-peasy. Harbor freight drill press for peanuts, a good stable clamp down, some brass tubing and JB Weld from Home Depot is all that is required.

Ansbacher

Posted by: pete000 Jan 20 2021, 07:07 PM

Nice ! @http://www.914world.com/bbs2/index.php?showuser=22105

Posted by: carl k Jan 20 2021, 10:24 PM

If these are anything like Weber IDF's, the circled tube has a small screw in it- remove the screw and that's the vacuum port.

Carl

Posted by: BK911 Jan 22 2021, 08:51 AM

QUOTE(carl k @ Jan 20 2021, 11:24 PM)

If these are anything like Weber IDF's, the circled tube has a small screw in it- remove the screw and that's the vacuum port.

Carl