Printable Version of Topic

Posted by: Superhawk996 Jan 24 2021, 01:05 PM

Need not a have a functional blower and/or control levers but open to options on what's available out there for a reasonable price.


Sure, I could JB weld mine up but it would still be pretty crappy.

My upper fresh air housing has been beaten up pretty bad. Cracked housing in a couple of places, one of the drain pipe tube outlets has been cracked off pretty close the the housing, missing spring clips to hold it together in two places, and in one, the plastic tangs themselves are broken off.

Not concerned about quality of the foam gaskets. Can replace those easily enough.

Let me know what you have and how much you need for what you have.

Posted by: Fosterjoejr Jan 24 2021, 04:24 PM

QUOTE(Superhawk996 @ Jan 24 2021, 11:05 AM)

Need not a have a functional blower and/or control levers but open to options on what's available out there for a reasonable price.


Sure, I could JB weld mine up but it would still be pretty crappy.

My upper fresh air housing has been beaten up pretty bad. Cracked housing in a couple of places, one of the drain pipe tube outlets has been cracked off pretty close the the housing, missing spring clips to hold it together in two places, and in one, the plastic tangs themselves are broken off.

Not concerned about quality of the foam gaskets. Can replace those easily enough.

Let me know what you have and how much you need for what you have.

Posted by: bdstone914 Jan 25 2021, 12:19 PM

QUOTE(Superhawk996 @ Jan 24 2021, 01:05 PM)

Need not a have a functional blower and/or control levers but open to options on what's available out there for a reasonable price.

I
Sure, I could JB weld mine up but it would still be pretty crappy.

My upper fresh air housing has been beaten up pretty bad. Cracked housing in a couple of places, one of the drain pipe tube outlets has been cracked off pretty close the the housing, missing spring clips to hold it together in two places, and in one, the plastic tangs themselves are broken off.

Not concerned about quality of the foam gaskets. Can replace those easily enough.

Let me know what you have and how much you need for what you have.

Posted by: bdstone914 Jan 25 2021, 12:21 PM

QUOTE(Superhawk996 @ Jan 24 2021, 01:05 PM)

Need not a have a functional blower and/or control levers but open to options on what's available out there for a reasonable price.

I
Sure, I could JB weld mine up but it would still be pretty crappy.

My upper fresh air housing has been beaten up pretty bad. Cracked housing in a couple of places, one of the drain pipe tube outlets has been cracked off pretty close the the housing, missing spring clips to hold it together in two places, and in one, the plastic tangs themselves are broken off.

Not concerned about quality of the foam gaskets. Can replace those easily enough.

Let me know what you have and how much you need for what you have.

Posted by: rfinegan Jan 25 2021, 02:35 PM

I posted some pics of parts I have here:
http://www.914world.com/bbs2/index.php?showtopic=350648&hl=fresh+air+box

Posted by: Superhawk996 Jan 26 2021, 09:46 AM

Found.


Thank you to all those that responded with various options.