Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: SMOG PUMP PULLEY
Posted by: 925tedy Feb 4 2021, 01:33 PM
I am looking for a 1976 914 Smog Pump Pulley.
If anyone has one to sell, or you can direct me to where I can find one, I’d really appreciate it.
Thank you.
Posted by: 914LIVE Feb 4 2021, 02:56 PM
=================================
Good day.
I have a few.
Grand total of $ 0.00 plus shipping.
Will find them and report back.
Thank you, 914LIVE.
===================================
Posted by: 914Sixer Feb 4 2021, 04:49 PM
I could use one if possible. Glad to pay shipping. Want to do some AC engineering with it.
Posted by: Al Meredith Feb 4 2021, 04:56 PM
QUOTE(925tedy @ Feb 4 2021, 12:33 PM) 
I am looking for a 1976 914 Smog Pump Pulley.
If anyone has one to sell, or you can direct me to where I can find one, I’d really appreciate it.
Thank you.
I have one but want to sell the whole system $250 with or without the 4 cylinder rack,
Posted by: 925tedy Feb 4 2021, 06:21 PM
QUOTE(914LIVE @ Feb 4 2021, 02:56 PM)
=================================
Good day.
I have a few.
Grand total of $ 0.00 plus shipping.
Will find them and report back.
Thank you, 914LIVE.
===================================
Thank you.
Let me know.
Posted by: 925tedy Feb 4 2021, 06:25 PM
QUOTE(Al Meredith @ Feb 4 2021, 04:56 PM)
QUOTE(925tedy @ Feb 4 2021, 12:33 PM)
I am looking for a 1976 914 Smog Pump Pulley.
If anyone has one to sell, or you can direct me to where I can find one, I’d really appreciate it.
Thank you.
I have one but want to sell the whole system $250 with or without the 4 cylinder rack,
What part is the four cylinder rack?
Is it in the picture?
Thank you
Posted by: 925tedy Feb 4 2021, 06:29 PM
QUOTE(Al Meredith @ Feb 4 2021, 04:56 PM)
QUOTE(925tedy @ Feb 4 2021, 12:33 PM)
I am looking for a 1976 914 Smog Pump Pulley.
If anyone has one to sell, or you can direct me to where I can find one, I’d really appreciate it.
Thank you.
I have one but want to sell the whole system $250 with or without the 4 cylinder rack,
How’s the rubber on the pulley
Posted by: Al Meredith Feb 5 2021, 02:06 PM
Whoops ! I Just went and looked at the pulley setup that has been a box for a couple of years. I have two shroud to pulleys and neither one has a rubber buffer. I understand they are no longer available so I'm withdrawing my ad. IF MICKY 914 IS ON THE BOARD THIS ITEM MAY BE SOMETHING 914 RUBBER SHOULD TAKE A LOOK AT. AL
Posted by: burton73 Feb 5 2021, 03:39 PM
QUOTE(Al Meredith @ Feb 5 2021, 12:06 PM)
Whoops ! I Just went and looked at the pulley setup that has been a box for a couple of years. I have two shroud to pulleys and neither one has a rubber buffer. I understand they are no longer available so I'm withdrawing my ad. IF MICKY 914 IS ON THE BOARD THIS ITEM MAY BE SOMETHING 914 RUBBER SHOULD TAKE A LOOK AT. AL
The sacrificial rubber part breaks when a smog pump freeze. The bearings also wear but the rubber disk is bonded to 2 metal disks that bolt up to the crank shaft. Frozen pump and the rubber disk rips.
Bob B
Posted by: 914LIVE Feb 5 2021, 07:24 PM
=================================
PULLEY update :
I have found two so far and guess what ?
BUSTED RUBBERS.
Will continue looking. Perhaps "third one,
is a charm".
Stay tuned !!!
=================================
Posted by: Robarabian Feb 5 2021, 09:11 PM
QUOTE(914LIVE @ Feb 5 2021, 05:24 PM)
=================================
PULLEY update :
I have found two so far and guess what ?
BUSTED RUBBERS.
Will continue looking. Perhaps "third one,
is a charm".
Stay tuned !!!
=================================
@http://www.914world.com/bbs2/index.php?showuser=25162 I have a good one if you want it. Ill pull it out tomorrow and take another look, but last I looked the rubber was in good shape. Pay shipping and it is yours.
Posted by: Al Meredith Feb 6 2021, 03:35 PM
Actually i have two pulleys, One has a larger bearing and two different size cast pulleys. I think it is from my 912E and is for the smog pump and the AC compressor .
Posted by: 925tedy Feb 6 2021, 06:54 PM
QUOTE(Robarabian @ Feb 5 2021, 09:11 PM)
QUOTE(914LIVE @ Feb 5 2021, 05:24 PM)
=================================
PULLEY update :
I have found two so far and guess what ?
BUSTED RUBBERS.
Will continue looking. Perhaps "third one,
is a charm".
Stay tuned !!!
=================================
@http://www.914world.com/bbs2/index.php?showuser=25162 I have a good one if you want it. Ill pull it out tomorrow and take another look, but last I looked the rubber was in good shape. Pay shipping and it is yours.
Shipping is absolutely no problem.
Can you send me a photo of it.
Thank you
Posted by: 925tedy Feb 6 2021, 08:16 PM
QUOTE(Al Meredith @ Feb 6 2021, 03:35 PM)
Actually i have two pulleys, One has a larger bearing and two different size cast pulleys. I think it is from my 912E and is for the smog pump and the AC compressor .
What kind of smog apparatus is it?
Can you send a photo?
Thank you
Posted by: Robarabian Feb 7 2021, 10:42 AM
Sorry I forgot.. I will go dig today and post here or you can PM me your email address and I can send several..
Rob
QUOTE(925tedy @ Feb 6 2021, 04:54 PM)
QUOTE(Robarabian @ Feb 5 2021, 09:11 PM)
QUOTE(914LIVE @ Feb 5 2021, 05:24 PM)
=================================
PULLEY update :
I have found two so far and guess what ?
BUSTED RUBBERS.
Will continue looking. Perhaps "third one,
is a charm".
Stay tuned !!!
=================================
@http://www.914world.com/bbs2/index.php?showuser=25162 I have a good one if you want it. Ill pull it out tomorrow and take another look, but last I looked the rubber was in good shape. Pay shipping and it is yours.
Shipping is absolutely no problem.
Can you send me a photo of it.
Thank you
Posted by: Robarabian Feb 8 2021, 09:18 PM
Its no good... its cracking....Sorry.
Posted by: 925tedy Feb 8 2021, 09:19 PM
QUOTE(Robarabian @ Feb 7 2021, 10:42 AM)
Sorry I forgot.. I will go dig today and post here or you can PM me your email address and I can send several..
Rob
QUOTE(925tedy @ Feb 6 2021, 04:54 PM)
QUOTE(Robarabian @ Feb 5 2021, 09:11 PM)
QUOTE(914LIVE @ Feb 5 2021, 05:24 PM)
=================================
PULLEY update :
I have found two so far and guess what ?
BUSTED RUBBERS.
Will continue looking. Perhaps "third one,
is a charm".
Stay tuned !!!
=================================
@http://www.914world.com/bbs2/index.php?showuser=25162 I have a good one if you want it. Ill pull it out tomorrow and take another look, but last I looked the rubber was in good shape. Pay shipping and it is yours.
Shipping is absolutely no problem.
Can you send me a photo of it.
Thank you
Hi there
I’m sorry, but I’m kinda confused with all of our posts.
My fault.
Did you happen to find a working one of these smog pump pulleys, or are they all not functional because of the busted rubber.
If you could let me know I’d really appreciate it.
Thank you.
Posted by: Robarabian Feb 8 2021, 09:19 PM
One more photo
Posted by: Robarabian Feb 9 2021, 09:22 AM
It is functional. The rubber is attached well, I just see a slight split forming. The bearing spins freely, not rusty, nothing bent. You are welcome to it for free, I will never use it. Unless the smog pump isn't working, I don't see too much stress on the pulley and if you don't over tighten the belt, I am sure it would work for a long time. Others may chime in, I'm not an expert on smog cars, I happened to have bought a 75-76 2.0 engine from another member out here and when I stripped it all down, I put the smog parts into the box with the rest of the FI stuff till I am ready to use any of it.
QUOTE(925tedy @ Feb 8 2021, 07:19 PM)
QUOTE(Robarabian @ Feb 7 2021, 10:42 AM)
Sorry I forgot.. I will go dig today and post here or you can PM me your email address and I can send several..
Rob
QUOTE(925tedy @ Feb 6 2021, 04:54 PM)
QUOTE(Robarabian @ Feb 5 2021, 09:11 PM)
QUOTE(914LIVE @ Feb 5 2021, 05:24 PM)
=================================
PULLEY update :
I have found two so far and guess what ?
BUSTED RUBBERS.
Will continue looking. Perhaps "third one,
is a charm".
Stay tuned !!!
=================================
@http://www.914world.com/bbs2/index.php?showuser=25162 I have a good one if you want it. Ill pull it out tomorrow and take another look, but last I looked the rubber was in good shape. Pay shipping and it is yours.
Shipping is absolutely no problem.
Can you send me a photo of it.
Thank you
Hi there
I’m sorry, but I’m kinda confused with all of our posts.
My fault.
Did you happen to find a working one of these smog pump pulleys, or are they all not functional because of the busted rubber.
If you could let me know I’d really appreciate it.
Thank you.
Posted by: 925tedy Feb 9 2021, 04:50 PM
QUOTE(Robarabian @ Feb 9 2021, 09:22 AM)
It is functional. The rubber is attached well, I just see a slight split forming. The bearing spins freely, not rusty, nothing bent. You are welcome to it for free, I will never use it. Unless the smog pump isn't working, I don't see too much stress on the pulley and if you don't over tighten the belt, I am sure it would work for a long time. Others may chime in, I'm not an expert on smog cars, I happened to have bought a 75-76 2.0 engine from another member out here and when I stripped it all down, I put the smog parts into the box with the rest of the FI stuff till I am ready to use any of it.
QUOTE(925tedy @ Feb 8 2021, 07:19 PM)
QUOTE(Robarabian @ Feb 7 2021, 10:42 AM)
Sorry I forgot.. I will go dig today and post here or you can PM me your email address and I can send several..
Rob
QUOTE(925tedy @ Feb 6 2021, 04:54 PM)
QUOTE(Robarabian @ Feb 5 2021, 09:11 PM)
QUOTE(914LIVE @ Feb 5 2021, 05:24 PM)
=================================
PULLEY update :
I have found two so far and guess what ?
BUSTED RUBBERS.
Will continue looking. Perhaps "third one,
is a charm".
Stay tuned !!!
=================================
@http://www.914world.com/bbs2/index.php?showuser=25162 I have a good one if you want it. Ill pull it out tomorrow and take another look, but last I looked the rubber was in good shape. Pay shipping and it is yours.
Shipping is absolutely no problem.
Can you send me a photo of it.
Thank you
Hi there
I’m sorry, but I’m kinda confused with all of our posts.
My fault.
Did you happen to find a working one of these smog pump pulleys, or are they all not functional because of the busted rubber.
If you could let me know I’d really appreciate it.
Thank you.
I’ll take that one.
How much for the shipping?
I’m at
55 Chumasero Drive
San Francisco, Ca. 94132
Posted by: Robarabian Feb 9 2021, 09:09 PM
Ill send it to you Friday when I am not working. I'm sure it will just be a couple bucks. All good, Ill PM you when it goes out with a tracking number. Glad you can use it.
QUOTE(925tedy @ Feb 9 2021, 02:50 PM)
QUOTE(Robarabian @ Feb 9 2021, 09:22 AM)
It is functional. The rubber is attached well, I just see a slight split forming. The bearing spins freely, not rusty, nothing bent. You are welcome to it for free, I will never use it. Unless the smog pump isn't working, I don't see too much stress on the pulley and if you don't over tighten the belt, I am sure it would work for a long time. Others may chime in, I'm not an expert on smog cars, I happened to have bought a 75-76 2.0 engine from another member out here and when I stripped it all down, I put the smog parts into the box with the rest of the FI stuff till I am ready to use any of it.
QUOTE(925tedy @ Feb 8 2021, 07:19 PM)
QUOTE(Robarabian @ Feb 7 2021, 10:42 AM)
Sorry I forgot.. I will go dig today and post here or you can PM me your email address and I can send several..
Rob
QUOTE(925tedy @ Feb 6 2021, 04:54 PM)
QUOTE(Robarabian @ Feb 5 2021, 09:11 PM)
QUOTE(914LIVE @ Feb 5 2021, 05:24 PM)
=================================
PULLEY update :
I have found two so far and guess what ?
BUSTED RUBBERS.
Will continue looking. Perhaps "third one,
is a charm".
Stay tuned !!!
=================================
@http://www.914world.com/bbs2/index.php?showuser=25162 I have a good one if you want it. Ill pull it out tomorrow and take another look, but last I looked the rubber was in good shape. Pay shipping and it is yours.
Shipping is absolutely no problem.
Can you send me a photo of it.
Thank you
Hi there
I’m sorry, but I’m kinda confused with all of our posts.
My fault.
Did you happen to find a working one of these smog pump pulleys, or are they all not functional because of the busted rubber.
If you could let me know I’d really appreciate it.
Thank you.
I’ll take that one.
How much for the shipping?
I’m at
55 Chumasero Drive
San Francisco, Ca. 94132
Posted by: Jett Jan 26 2022, 12:23 PM
Resurrecting this thread… We are trying to restore the smog system on a 76 2.0, and like others are looking for the pulley.
Anyone have the pulley or other smog parts for sale?
Thanks!
Posted by: ejm Jan 28 2022, 05:57 AM
@http://www.914world.com/bbs2/index.php?showuser=17686 Check your PM's
Posted by: Jett Jan 28 2022, 09:34 AM
QUOTE(ejm @ Jan 28 2022, 03:57 AM)
@http://www.914world.com/bbs2/index.php?showuser=17686 Check your PM's
@http://www.914world.com/bbs2/index.php?showuser=224 . Responded Ed to the PM and yes will take the pulley, thanks!!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)