Printable Version of Topic

Posted by: Luke M Feb 5 2021, 12:24 PM

Looking to buy a Right front fender and a section of the right inner wheel housing.
Also need a section under the gas tank. See attached pics.

The fender needs to be in great shape, no rust or damage. Would like a NOS but will take a nice used as well. Also need a section of the inner wheel housing. The section directly behind the right door post (see attached pics and area outlined). Must be in way better condition then what I currently have.
LMK what you have.



* Purchased an NOS r/f fender. Still need a few more sheet metal items listed. *

Thanks,


Attached image(s)

Posted by: 914LIVE Feb 6 2021, 12:21 PM

===================================

Good day.

PM sent on a complete RUST FREE "tub"/"shell"
from a concours/showroom car that I parted out.

One of the most solid 914 bodies that I have seen
(and I have owned 50 of them).

Can section any areas/pieces that you need.

Thank you, 914LIVE.

====================================

Posted by: 914LIVE Feb 6 2021, 02:07 PM

Posted by: Luke M Feb 14 2021, 08:28 AM

I need a very nice, rust/dent/damage free right front fender.
NOS would be nice but will take a very nice used one as well.
Also need the section behind the right door post ( as shown in pic ).

Posted by: Luke M Feb 19 2021, 06:50 PM

Any Cali guys cutting up a rust free 914....

Posted by: Superhawk996 Feb 19 2021, 07:11 PM

I was able to get some nice donor metal from Vince @http://www.914world.com/bbs2/index.php?showuser=7898

Not sure if you are aware but RD is now making both side of the lower door post pieces that go outboard of the outer longitudinal. Shows up under new products. I fabricated my passenger side from scratch before these became available. Just bought a driver side.

https://www.restoration-design.com/store/product/PP346ECR

@http://www.914world.com/bbs2/index.php?showuser=3574

Posted by: Luke M Feb 19 2021, 07:20 PM

I know about the RD parts. The problem is they are a little larger then stock. It's actually the overlays from their outer long stiffener. That's what Pete told me a few weeks ago. I did buy a set to try and it would work with some fine tuning. I'm replacing that whole door post with an NOS part. What I need is the section behind all that. It's actually the inner wheel housing that extends into the cab. I think I've dealt with Vince before so I'll pm him.

Posted by: Luke M Feb 20 2021, 07:38 PM

Found an NOS right front fender.

Still looking for a few other sheet metal parts listed.

Thanks,


Attached image(s)

Posted by: 914werke Feb 21 2021, 01:47 PM

Luke I have a full dance card, but I DO have a donor (in green) with the pieces you are after. If you dont find those parts sooner rather than later drop me a line.