Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: 1.8 intake boot fittings
Posted by: timothy_nd28 Feb 18 2021, 01:44 PM
I'm looking for the two metal sleeves that fit inside the intake boot. I'm after 19a and 19b which are circled in the picture below. 022133199C and 022133199D
Posted by: timothy_nd28 Feb 18 2021, 11:05 PM
Nevermind, had a friend machine a couple new ones. With these new reproduction intake boots, the OEM fittings were not a tight fit. These new fittings were made slightly bigger to ensure a better vacuum seal 
Posted by: StarBear Feb 19 2021, 08:20 AM
QUOTE(timothy_nd28 @ Feb 19 2021, 12:05 AM) 
Nevermind, had a friend machine a couple new ones. With these new reproduction intake boots, the OEM fittings were not a tight fit. These new fittings were made slightly bigger to ensure a better vacuum seal
Nice job!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)