Printable Version of Topic

Posted by: RiqueMar Mar 30 2021, 11:24 PM

Looking for a set, either NOS or in reasonable condition to use or create a template and cut out of carpet- Believe there to be three-total pieces.

Photo attached of other-members cars. Thanks!

Posted by: bdstone914 Mar 31 2021, 05:26 AM

You are better off to use neoprene rubber. The original were either felt or scrap carpetvwhick absorbed water and rusted the tank. i have used a cork-rubber gasket material with adhesive backing i get from McMaster Carr.

Posted by: saigon71 Mar 31 2021, 05:32 AM

I used pipe insulation from Home Depot - attached with double sided tape.

Posted by: mepstein Mar 31 2021, 05:58 AM

Grainger sells rubber sheeting with adhesive on the back.
Granted, your car will probably see little rain.

Posted by: Pezz Mar 31 2021, 08:56 AM

Certainly agree with aforementioned suggestions,
I have some scrap neoprene 1/4 inch, black dense, with strong adhesive back.
I will give you a square foot or so, if that will do.
Send you a sheet the size of a mailing envelope.
PM me if interested.
@Pezz

Posted by: bdstone914 Apr 1 2021, 08:02 PM

@http://www.914world.com/bbs2/index.php?showuser=9478
. date='Mar 30 2021, 10:24 PM' post='2904360']
Looking for a set, either NOS or in reasonable condition to use or create a template and cut out of carpet- Believe there to be three-total pieces.

Photo attached of other-members cars. Thanks!

I have a pair you can have for free if you like the felt sponge type