Anybody know a good source for the side sill rivets? I have metal rivets, which might be a pain to drill out when/if I need to remove my rockers. Thanks
I'm pretty sure 914rubber carries them. Call if you can't find it on their site.
https://914rubber.com/rocker-panel-rivet-set-of-14-black-aluminum-1
AFAIK Porsche also still sells them in clear because they're used on 911s some, so would be available at your local dealer in a pinch, if not by delivery from 914Rubber.
And - YES - they'll be easier to cut off with a razor blade or Xacto Knife when it comes time to clean out behind those rockers.
Speaking of which - you might want to pick up a set of fresh new Cheesehead Bolts/Screws, washers & plastic spacers for the Rockers too!
IIRC 914Rubber has them in a kit.
Tom
///////
Of course....when in doubt, 914Rubber
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)