Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: schnor washers for cv bolts
Posted by: Krieger May 30 2021, 11:51 AM
I have 5 and need enough to do the CVS on the trans.
Posted by: 914Sixer May 30 2021, 11:54 AM
Shoot me a PM with your address, should have some in the warehouse.
Posted by: Krieger May 30 2021, 12:28 PM
Shoot me a PM with your address, should have some in the warehouse.
Posted by: roblav1 May 30 2021, 12:54 PM
Not that this info will help you here, but I found that Schnor washers for a Hummer work for the M10 version allen bolts. And they're cheap.
Posted by: rick 918-S May 30 2021, 01:08 PM
I found them at Ace Hardware. You may have to bring a sample with you but they should be in the draws.
Posted by: Krieger May 30 2021, 06:07 PM
I found them at Ace Hardware. You may have to bring a sample with you but they should be in the draws.
I just tried my Ace, but no luck
I think Mark is hooking me up!
Posted by: bdstone914 May 30 2021, 06:18 PM
I found them at Ace Hardware. You may have to bring a sample with you but they should be in the draws.
I just tried my Ace, but no luck
I think Mark is hooking me up!I get them from mcmastercarr.com
They are $10 for 100.
Posted by: Highland May 31 2021, 09:10 PM
If you haven't found a source yet, I can send you some in a letter. Just pm me your address. Is 11 more what you need?
Attached thumbnail(s)
Posted by: Krieger May 31 2021, 10:27 PM
Thank you for the offer Highland. Mark is sending me enough for the job.
Posted by: 914Sixer Jun 1 2021, 06:23 AM
Yep, going out this morning 12 new ones.
Posted by: Tdskip Jun 1 2021, 06:26 AM
McMaster Carr has these as well as an FYI
Posted by: rhodyguy Jun 1 2021, 09:01 AM
Also found as 'Belleville' washers at McMaster for little more than pennies.
Posted by: pilothyer Jun 1 2021, 02:32 PM
Also found as 'Belleville' washers at McMaster for little more than pennies.
Best way to buy, then you'll have 100 to keep up with 
Posted by: Jett Jun 1 2021, 08:59 PM
I found them at Ace Hardware. You may have to bring a sample with you but they should be in the draws.
I just tried my Ace, but no luck
I think Mark is hooking me up!I get them from mcmastercarr.com
They are $10 for 100.
+1 and they have crazy fast shipping.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)