Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB - Misc parts
Posted by: NARP74 Jul 22 2021, 01:27 PM
A few odd things I am looking for. Not a pristine restoration, sad old race car that needs some love.
Mahle wheel, ONE, 914.361.015.00, I will have two Pedrini wheels if I find these
Air guide plates, 74 2.0, under the engine cooling tins, air duct floor in the PET
022 119 353 Left
022 119 355 Right
Other Stuff
Full cover for inside use
1974 Owner’s manuals, decent shape, not concours, not too expensive
Porsche 914 maintenance manual, less than the online price
Let me know
Posted by: ericoneal Jul 23 2021, 06:58 AM
I think I have a driver side warm air guide tin. Is that what you are looking for?
Posted by: NARP74 Jul 23 2021, 09:41 AM
022 119 353 Left
022 119 355 Right
I believe these are the parts. Someone contacted me that might have both. I'll check with them.
Posted by: NARP74 Jul 25 2021, 05:24 PM
Bueller? Bueller?
Posted by: PCA7GGR Jul 25 2021, 07:40 PM
I sent you a pm regarding a repair manual and you did not respond.
Good luck finding the parts you need
Posted by: NARP74 Jul 26 2021, 08:46 AM
I sent you a pm regarding a repair manual and you did not respond.
Good luck finding the parts you need
Sorry, I was still figuring out what to say. I have never seen what you are selling so I am not sure yet. I think I am looking for the large set of manuals but I do not want to pay $400 for them. I was waiting to see what comes up. I'll take a look at yours again.
Posted by: NARP74 Jul 30 2021, 04:17 PM
The list is getting a little smaller...
Posted by: aharder Jul 30 2021, 05:03 PM
I just bought this one on Amazon
https://www.amazon.com/dp/B0847LFGCR?psc=1&ref=ppx_yo2_dt_b_product_details
GSKMOTOR BALCK Ignition Coil Mount Bracket Replace Round Cylinder Type Coils 260289302351W for Ford 351C 400 Mustang F150
Mounted it to the original screw hole on the Fan housing
Posted by: NARP74 Jul 30 2021, 07:14 PM
I just bought this one on Amazon
https://www.amazon.com/dp/B0847LFGCR?psc=1&ref=ppx_yo2_dt_b_product_details
GSKMOTOR BALCK Ignition Coil Mount Bracket Replace Round Cylinder Type Coils 260289302351W for Ford 351C 400 Mustang F150
Mounted it to the original screw hole on the Fan housing
Thanks. Do you know what the hardware specs are for the fan housing mounting hole?
Posted by: aharder Jul 30 2021, 08:35 PM
The screw should be a M6 x 1.0 x 10MM or 15MM, Hex is M10
Posted by: JamesM Jul 31 2021, 10:39 AM
Oddly enough I somehow wound up with exactly 2 extra Mahle wheels.
A few odd things I am looking for. Not a pristine restoration, sad old race car that needs some love.
Mahle wheels, two, 914.361.015.00, I will have two Pedrini wheels if I find these
Coil mount bracket, alternate location, cooling fan housing, not on the tins
Can anyone share a pic of the bracket? Can I make one?
Air guide plates, 74 2.0, under the engine cooling tins, air duct floor in the PET
022 119 353 Left
022 119 355 Right
Full cover for inside use
1974 Owner’s manuals, decent shape, not concours, not too expensive
Porsche 914 maintenance manual, less than the online price
Let me know
Posted by: NARP74 Jul 31 2021, 10:48 AM
OK, so the same as the tins hardware.
Posted by: NARP74 Jul 31 2021, 10:49 AM
JamesM, let's talk
Posted by: NARP74 Aug 5 2021, 03:58 PM
I think this is the bracket I am looking for. Do you have one to sell?
Posted by: NARP74 Aug 10 2021, 10:52 AM
If you are in to smoking meat; I have hit the stall!
Posted by: NARP74 Aug 20 2021, 09:18 AM
Slowly making the list smaller. Still looking for a few things.
Posted by: 914sgofast2 Aug 20 2021, 12:10 PM
I think this is the bracket I am looking for. Do you have one to sell?
That’s the same bracket used on VW Bay Window buses from the 70’s
Posted by: NARP74 Aug 20 2021, 03:10 PM
That expands the search a bit, thanks. Off to the Samba.
Posted by: NARP74 Aug 29 2021, 06:37 PM
If I was a marathon runner, "I've hit the wall"...
Posted by: NARP74 Aug 31 2021, 09:32 AM
Got the coil bracket yesterday.
Posted by: NARP74 Sep 12 2021, 03:46 PM
Got the coil bracket yesterday.
It's the 7th inning stretch
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)