WTB heater blower hose.
OEM , No cracks or splits.
(Yeah I know 914 rubber sells them, not what I want)
This one.
Show me what you have.
Bump
Someone has to have one of these they are not using.
NLA for years. A victim of engine compartment heat.
I searched and was fortunate enough to find a good used one that I reinforced internally for our 75 2.0, and another NOS one from a VERY kind member for our 73 2.0.
That said, as Mark mentioned the heat turns them brittle.
Perhaps 914Rubber can reproduce these fairly easily … along with the red vacuum hoses
The red vac hose (as well as green) we are putting kits together for.
The plastic hose is possible but tooling isn't cheap.
Just got one from Auto Atlanta. Looks close to the one in your photo. Let me know if you want to stop by the garage and take a look at it to see if it will work.
EJP914
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)