Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ Need a cold start injector for a 1.8
Posted by: rick 918-S Sep 3 2021, 06:11 AM
Send me a PM if you have one. Thanks!
Posted by: jim_hoyland Sep 3 2021, 04:01 PM
Pm sent…
Posted by: jim_hoyland Sep 3 2021, 04:20 PM
It’s yours …. 
@http://www.914world.com/bbs2/index.php?showuser=8358 918-S
Attached image(s)
Posted by: ndfrigi Sep 3 2021, 04:56 PM
Jim, I think Rick is referring to the middle injector that provides fuel on old or initial start.
Posted by: rick 918-S Sep 3 2021, 05:43 PM
Yes the one one in the plenum. This one has a "T" in the end. One line in and one over to the left side fuel rail. I will get a photo of I can. The one that is on the plenum has a cracked line fitting.
Posted by: ndfrigi Sep 3 2021, 05:56 PM
Yes the one one in the plenum. This one has a "T" in the end. One line in and one over to the left side fuel rail. I will get a photo of I can. The one that is on the plenum has a cracked line fitting.
Posted by: rick 918-S Sep 3 2021, 07:34 PM
Yes the one one in the plenum. This one has a "T" in the end. One line in and one over to the left side fuel rail. I will get a photo of I can. The one that is on the plenum has a cracked line fitting.
Yep that's the one.
Posted by: jim_hoyland Sep 3 2021, 08:53 PM
I’ll go back and look in the FI box; my mistake…
Posted by: rick 918-S Sep 4 2021, 02:37 AM
Got the pm Jim. TY!
Posted by: jim_hoyland Sep 4 2021, 06:27 AM
Got the pm Jim. TY!
Got it off, needs cleaning. The nipple part is shorter than the one in the picture above
Attached image(s)
Posted by: rick 918-S Sep 4 2021, 06:42 AM
That's the one Jim.
Posted by: jim_hoyland Sep 4 2021, 08:57 AM
Ok, I’ll send it today
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)