Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS: Assorted 1974 2.0 Factory Engine and Body Parts

Posted by: JDW914 Sep 25 2021, 10:50 AM

I have a bunch of original parts that came from my car I want to get rid of. I'll take payment through PayPal or Zelle. Shipping is from the St. Louis, MO area. PM me with what you want and we'll go from there. I'm willing to entertain offers as long as they're reasonable.

Engine:

94mm Cylinders, Pistons, Wrist Pins, and Gotze Rings - $250 - https://i.imgur.com/N28YXhI.jpg, https://i.imgur.com/ahVKDUk.jpg

Cylinder Base and Head Gaskets - $20, no shipping cost - https://i.imgur.com/OCB3dtn.jpg

Oil Pump - $60 - https://i.imgur.com/mZGpuQH.jpg, https://i.imgur.com/03nOzoB.jpg

Camshaft - $200 - https://i.imgur.com/IOtW6c8.jpg, https://i.imgur.com/PjsdxYO.jpg

Lifters - $60 - https://i.imgur.com/CUZrw55.jpg

Pushrods - $80 - https://i.imgur.com/v2avLkI.jpg

Pushrod Tubes - $50 - https://i.imgur.com/Fv7uKeK.jpg

Injector Retainers (I only have 3) - $5/ea., no shipping cost - https://i.imgur.com/VC4Dd0O.jpg

TPS Plate (1 288 310 006) - $50, no shipping cost - https://i.imgur.com/O9kQxUY.jpg

Oil Pressure Sensor (not factory) - $15, no shipping cost - https://i.imgur.com/VJVNAiO.jpg

Body/Trim:

Windshield Upper (1x LH, 2x RH), finish good, need polish - $50/ea. - https://i.imgur.com/MTFHhWv.jpg

A- and B-Pillar Seal Retainer/Moulding Trim, finish good, decent polish - $80 - https://i.imgur.com/anKIYq1.jpg

Sail Pillar Rear Trim, rough contition - $50 - https://i.imgur.com/hKFoagt.jpg

Bumper Spacer/Mounts (2x) - $20 - https://i.imgur.com/29ZySJA.jpg

Posted by: JDW914 Oct 4 2021, 06:15 PM

Bump.