Posted by: nditiz1 Sep 28 2021, 02:55 PM
Selling the 3/4 side of engine tin off my 74 2.0 car. It was cut to allow for A/C much like every other dealer installed A/C.
$20 + actual shipping
Several starters for sale:
Needs to be rebuilt - Bosch SR17X. Turns and spins, but must have some dead spots on the brushes as it needs the Tanya Harding to get it going. - $20 plus shipping
Stock 911 starter off an 82SC - Running this one now, but about to take it off as I got a Hi-Torque, works great on my 2.7
$70 + shipping Can send pic if interested
Stock starter - Consider it a core, can't remember if this was off my old 923 trans. $20 + shipping in case in needs to be rebuilt. Can send pic if interested
Posted by: Superhawk996 Sep 28 2021, 04:38 PM
Nick,
I'll take the 2.0L 3/4 side tin
@http://www.914world.com/bbs2/index.php?showuser=17686
Posted by: Jett Sep 28 2021, 04:50 PM
QUOTE(Superhawk996 @ Sep 28 2021, 03:38 PM)
Nick,
I'll take the 2.0L 3/4 side tin
@http://www.914world.com/bbs2/index.php?showuser=17686
Lol, what part do we need?
Posted by: nditiz1 Sep 28 2021, 04:55 PM
I was hoping you saw this Phil, I know you are great at repairing them.
Posted by: Superhawk996 Sep 29 2021, 06:39 AM
QUOTE(Jett @ Sep 28 2021, 06:50 PM)
QUOTE(Superhawk996 @ Sep 28 2021, 03:38 PM)
Nick,
I'll take the 2.0L 3/4 side tin
@http://www.914world.com/bbs2/index.php?showuser=17686
Lol, what part do we need?
@http://www.914world.com/bbs2/index.php?showuser=17686 Let's see if this has less pitting. Plus I don't already have enought to do
I'm gathering a batch of parts to go to powder coat so this will just be another to build that batch.
Worst case, I'll fix it up to driver quality and then will repost back here when it's done at powder coat - probably around Dec.
Posted by: Jett Sep 29 2021, 08:36 AM
QUOTE(Superhawk996 @ Sep 29 2021, 05:39 AM)
QUOTE(Jett @ Sep 28 2021, 06:50 PM)
QUOTE(Superhawk996 @ Sep 28 2021, 03:38 PM)
Nick,
I'll take the 2.0L 3/4 side tin
@http://www.914world.com/bbs2/index.php?showuser=17686
Lol, what part do we need?
@http://www.914world.com/bbs2/index.php?showuser=17686 Let's see if this has less pitting. Plus I don't already have enought to do
I'm gathering a batch of parts to go to powder coat so this will just be another to build that batch.
Worst case, I'll fix it up to driver quality and then will repost back here when it's done at powder coat - probably around Dec.
Sounds great…can’t wait to see it repaired.