Well.... fall is here. I am getting back to my parts shed and some much needed cleaning. Lots of different things in this post. I will add more throughout the day.
I'm shipping for cost also.
in the past I've been going to USPS, or UPS and getting the price and PM'ing it directly to the interested party.
I'm shipping from 80503
and of course if you have access to a company shipping and better price, I'm happy to cooperate. oh... and pick up is always an option too.
First, are some cover plates, an internal part for the shift rod, and some new gaskets... All for a tail shifter. These are free to anyone that might be able to use, or even just want a gasket for a leaky trans... for the cost of shipping.
Attached thumbnail(s)
Next... A dash structure.
Honestly I doubt anyone needs this.
shipping is not going to be affordable based on the length
its likely going to end up in the metal recycle bin
but if someone is looking for a dash structure, this is from a 1972 chassis and came from my race car build
I'm looking for 10$.. so I can buy garage beer (a guy gets thirsty cleaning the shed)
Attached thumbnail(s)
window slider mechanism
someone will know for sure... I "think" its from an early window mechanism that I stripped from my 1972 race car build.
but I do not know for sure if it is early or late
Free + shipping (envelope)
Attached thumbnail(s)
gas tank buckle. decent condition
$5 +actual shipping
Attached thumbnail(s)
shift rod.
can someone tell me if this is tail or side shift?
I don't want to mislead anyone...
no more parts... just the one orphan rod
$15 + shipping
Attached image(s)
fuel tank support blocks... one right, one left
$10 + shipping
Attached image(s)
right and left sail panel aluminum trim
not perfect.
decent... but photo's of the edge of one side show some dings
I'll double check, but believe the small screws and spacers are still attached
$30 + shipping
Attached thumbnail(s)
Hinges....
all from my 1972 race car project.
a pair of front, a pair of rear, and a pair of engine lid
$20 for front or rear pairs
$10 for the smaller mounts...
(hey... can someone clarify.. are these at the engine bay I think?)
most of the shouldered bolts and hardware included.
Attached thumbnail(s)
"Ford" type of remote starter solenoid.
somehow I ended up with extra's...
more than I need.
I bet these are dirt cheap at the auto store.
this one is US made.
was working fine when removed...
(these are a very good solution to a hot start problem)
lets say $5 + shipping
Attached thumbnail(s)
door sill plates and trim (aluminum)
these are from my 1972 race car project also
they look really good... but one does have small dimples at the edge (pictured)
not bent
$30 for all 4 pieces
Attached thumbnail(s)
Could totally use the tail shift parts mainly the gaskets.
Any fuel tank strap parts please.
PM sent
Regulator board.. with some relays on it
I patched a small 2 inch area on the bottom
a previous owner used long wood screws to attach the VR in the past
(causing the potting to crack out in the area the screws penetrated)
I'm considering this a core
it was on a working car, but the potting is not great on the back and needs a refresh
$25 + shipping
Attached thumbnail(s)
PM sent. Yes to tank strap fitting, other tail shift parts. Thanks.
Brant
I'll take take fuel tank supports, got foam on on side
Also is the trim pieces 30 shipped? If so I'll take those too.
" I "think" its from an early window mechanism that I stripped from my 1972 race car build.
but I do not know for sure if it is early or late
Free + shipping (envelope)"
@http://www.914world.com/bbs2/index.php?showuser=47 Please let me know how much to ship, thanks
Email sent for hinges.
I’ll take the Ford style hot start solenoid. Shipping to Dallas 75233. Thx
.
interested in the door sill plates..Thanks frank
Bump
If you still have the F&R hinges/hardware I'd like them.
Would you happen to have the rear trunk lid springs by any chance?
LMK.. Thanks
Sorry Luke
I don’t have those hinges
I think they likely went to scrap metal long ago
Hi, Assuming tail shift parts all sold? if not - I'll be happy to buy. thank you!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)