Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Reinforced, vented, 5lug trailing arms with brakes, axles and spring/shocks

Posted by: garrettlee2 Nov 23 2021, 11:51 PM

$950 obo for the whole set up; but I will separate it. I believe the brakes to be bmw front calipers. This came off a friends old 914/6 race car
Trailing arms with hubs and stubs $500
Brake calipers and disks $250
Shocks with springs $250
Axles $100

Local pick up or delivery to Orange County
(909)838 7950 thanks
Attached Image

Posted by: kkid Nov 24 2021, 07:46 AM

What's the spring rate on the rear struts?

Posted by: garrettlee2 Nov 24 2021, 09:10 AM

QUOTE(kkid @ Nov 24 2021, 05:46 AM)

What's the spring rate on the rear struts?

Not sure I’ll see what I can figure out tonight

Posted by: Jvaledaserra Nov 24 2021, 10:02 AM

QUOTE(garrettlee2 @ Nov 24 2021, 12:51 AM)

$950 obo for the whole set up; but I will separate it. I believe the brakes to be bmw front calipers. This came off a friends old 914/6 race car
Trailing arms with hubs and stubs $500
Brake calipers and disks $250
Shocks with springs $250
Axles $100

Interested in the calipers and rotors. Shipping to 06084?

Thank you!

Local pick up or delivery to Orange County
(909)838 7950 thanks
Attached Image

Posted by: bdstone914 Nov 24 2021, 11:54 AM

QUOTE(garrettlee2 @ Nov 24 2021, 09:10 AM)

QUOTE(kkid @ Nov 24 2021, 05:46 AM)

What's the spring rate on the rear struts?

Not sure I’ll see what I can figure out tonight

They look like 140lb. Measure the thickness of the coil.

@http://www.914world.com/bbs2/index.php?showuser=14901
@http://www.914world.com/bbs2/index.php?showuser=8483

Posted by: HIPPIEKILLER Nov 24 2021, 01:32 PM

Looks like no hand brake right? Please confirm.

Posted by: garrettlee2 Nov 24 2021, 06:09 PM

QUOTE(HIPPIEKILLER @ Nov 24 2021, 11:32 AM)

Looks like no hand brake right? Please confirm.

Ya no hand brake

Posted by: Dunc Nov 25 2021, 11:40 PM

Can the entire assembly bolt in?

Posted by: bdstone914 Nov 27 2021, 09:35 AM

QUOTE(Dunc @ Nov 25 2021, 11:40 PM)

Can the entire assembly bolt in?

@http://www.914world.com/bbs2/index.php?showuser=17590
Depends on what is on your car now. What year is your car and how is it used ?
I am helping Garrett figure out exactly what they are. Yes they will bolt on but it depends on what you have on the car now. You will be affecting both suspension and braking systems. The calipers on the arms are BMW 320i with 48mm pistons for vented rotors. They would require much larger front calipers to keep the brake bias to the front. Or the calipers could be used as front with vented rotors, or remove the spacers and use with solid rotors.
We think the stub axles are machined down 911 ones. Checking the diameter and hole size to see what CV's will match.
These shocks have heavier springs than stock. They would work better with a front sway bar of stiffer torsion bars on the front and with matching front Bilstiein strut inserts.

@http://www.914world.com/bbs2/index.php?showuser=14901