Decided to stop hoarding extra parts. All prices are plus shipping. If you need more info or pics let me know. Everything is as shown.
1. 911 wide A calipers, rebuilt, low mileage $200/pair - sold
2. 914-4 rear calipers, $100/pair - sold
3. 24 mm 911 rotors, $40/pair
4. 914-4 rear rotors, drilled for 5 lug, $40/pair - sold
5. 911 front dust shields, $20/pair
6. 914 rear dust shields, $20/pair - sold
7. Gauge cluster (combo, tach, Speedo, panel), $100 - sold
8. Individual gauges $20 each - fuel, volt, temp gauge sold
9. 911 crossmember, $200 - sold
10. 5 x 130 x 1” aluminum spacers and lug nuts, $60/pair
11. Side shifter, $50 - sold
12. Dash defroster vents, $20/pair, small break on one but looks functional
13. SBC to 901 kit (engine to trans adapter, flywheel, pressure plate, clutch disk, starter), for 2 piece rear main seal type, $500
14. Renegade SBC water pump and mount, $60 - sold
Attached image(s)
Messaged you
I’ll take the 911 crossmember if still available. Thanks
I’ll take fuel gauge and 914 5 bolt rear disks.
I’ll take the rear calipers if for late model. Also the rear dust shield please. Thanks
Put me down for #4 drilled rotors if they're available, or become available..
.
Interested in gauge cluster and shifter
Will you post to Australia ?
Thanks,
John
@http://www.914world.com/bbs2/index.php?showuser=15191
I’ll take the waterpump and bracket. I was going to pm you about your waterpump and here it is perfect timing…
Thanks for the heads up Oscar
I’m down for the starter as well if you want to sell separate?
Thanks josh…
A picture of the back of the clock that was requested.
I position myself in case Mark passes or want to resell it.
I’d like the small volt and temp gauge if available. A little hard to tell by the picture but they look to be in decent condition.
Pm sent
.Ill take if not sold... Gauge cluster (combo, tach, Speedo, panel), $100 - sale pending
Thank you. I’ll take them with LEDS. Pm sent. Todd
Interested in the temperature gauge if still available
PM Sent. Interested in the Cross Member if still available.
Interested in the clock if available
@http://www.914world.com/bbs2/index.php?showuser=26158 here are some more pics of the front 911 dust shields. No obvious pitting that I can see but lots of brake dust and road grime. These pics are representative of both.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)