Printable Version of Topic
914World.com _ FS/WTB: 914 Parts _ Rear valence for...
Posted by: Speedo Jan 2 2022, 06:13 PM
Thinking about one of Ben's GT3 mufflers and would need a valence with the hump (or oval hole) in the middle. Let me know whatcha got. Is anybody making these?
Posted by: 914werke Jan 2 2022, 06:56 PM
In Metal of FG?
Im just finishing up one for a customer & one of Ben's "GT" dual center mufflers.
Posted by: Mikey914 Jan 2 2022, 07:13 PM
We do a fiberglass one that can be cut easily.
https://914rubber.com/fiberglass-rear-valance-black-gelcoat
Attached thumbnail(s)
Posted by: mb911 Jan 3 2022, 06:01 AM
Does anyone make a flared one ?
Posted by: mlindner Jan 3 2022, 07:28 AM
Ben, we have a customer in the shop asking for a GT3 style exhaust. So we might be making a valence with flares to finish the look. Kelly-Moss/Accumoto. Best, Mark
Posted by: DRPHIL914 Jan 3 2022, 08:53 AM
QUOTE(Speedo @ Jan 2 2022, 07:13 PM)
Thinking about one of Ben's GT3 mufflers and would need a valence with the hump (or oval hole) in the middle. Let me know whatcha got. Is anybody making these?
QUOTE(Mikey914 @ Jan 2 2022, 08:13 PM)
We do a fiberglass one that can be cut easily.
https://914rubber.com/fiberglass-rear-valance-black-gelcoat
@http://www.914world.com/bbs2/index.php?showuser=7170 this is what i did, i bought the fiberglass from 914rubber and made a template and cut out the opening then primed and sprayed with wurth stoneguard, the painted to seal it good. Looks nice. I would love to have a metal one someday but i dont want to mess up my OEM one.
@http://www.914world.com/bbs2/index.php?showuser=453 what are you charging to make a metal one? mine would be the twin tip center , narrow body car.
Phil
Posted by: Speedo Jan 3 2022, 11:10 AM
Interested also in a tall metal version...or fiberglass.
Posted by: mb911 Jan 3 2022, 02:29 PM
QUOTE(mlindner @ Jan 3 2022, 05:28 AM)
Ben, we have a customer in the shop asking for a GT3 style exhaust. So we might be making a valence with flares to finsih the look. Kelly-Moss/Accumoto. Best, Mark
Cool
Posted by: Steve Jan 3 2022, 04:08 PM
QUOTE(mb911 @ Jan 3 2022, 04:01 AM)
Does anyone make a flared one ?
Call up AIR, they used to make the GT rear valance,
https://americaninternationalracing.com/product/914-6-rear-valance-2/
Posted by: gereed75 Jan 4 2022, 08:59 AM
I bought a fiberglass one a few years back from 914dave at Hersey. Not sure where he got. Below is a picture of it vented and cut for a center outlet GT3 muff
Posted by: Cairo94507 Jan 4 2022, 09:07 AM
@http://www.914world.com/bbs2/index.php?showuser=15674 - That is a great looking valance for the GT muffler.
Posted by: Al Meredith Jan 4 2022, 09:18 AM
I have suggested a couple of times on this subject that maybe 914 rubber or restoration design should look at doing a 914-6 rear vallance due to the number of 914s being converted to sixs and need to cover the larger muffler . maybe even with louvers .
Posted by: peteyd Jan 4 2022, 10:28 AM
QUOTE(Al Meredith @ Jan 4 2022, 07:18 AM)
I have suggested a couple of times on this subject that maybe 914 rubber or restoration design should look at doing a 914-6 rear vallance due to the number of 914s being converted to sixs and need to cover the larger muffler . maybe even with louvers .
We have the /6 valence scanned and the tooling designed. I just need to put that tool in cue once the 356 speedster is complete.
Posted by: gereed75 Jan 4 2022, 11:51 AM
Pete, incredible things you guys are doing. Hope you sell a bunch
Restoration Design could not be in better hands really impressive
Posted by: racerbvd Jan 7 2022, 12:51 PM
QUOTE(gereed75 @ Jan 4 2022, 07:59 AM)
I bought a fiberglass one a few years back from 914dave at Hersey. Not sure where he got. Below is a picture of it vented and cut for a center outlet GT3 muff
That is very sweet..
Posted by: sbsix Jan 7 2022, 06:05 PM
Pete,
Put me down for a six rear valence as soon as they are ready!
Gary
Posted by: mb911 Jan 10 2022, 01:19 PM
QUOTE(Speedo @ Jan 2 2022, 04:13 PM)
Thinking about one of Ben's GT3 mufflers and would need a valence with the hump (or oval hole) in the middle. Let me know whatcha got. Is anybody making these?
@http://www.914world.com/bbs2/index.php?showuser=7170 I do have 1 muffler set aside for you with gt3 tail pipes if you are interested let me know or it will go on the open market as I close out these mufflers.
Posted by: Mikey914 Jan 12 2022, 01:06 AM
QUOTE(Al Meredith @ Jan 4 2022, 07:18 AM)
I have suggested a couple of times on this subject that maybe 914 rubber or restoration design should look at doing a 914-6 rear vallance due to the number of 914s being converted to sixs and need to cover the larger muffler . maybe even with louvers .
Yes on the list I’ll bump it up.
Mark
Posted by: Speedo Jan 19 2022, 01:34 PM
Ok,
Got the GT3 muffler from Ben. Also received several tall rear valance offers from scammers. Needing to source either a tall fiberglass varient or an original 6 valence to copy in fiberglass. Considering louvers or mesh, like shown above. Or if someone has the capability to produce one for a GT3 muffler, send me a PM or email directly.
Posted by: Speedo Apr 16 2022, 06:47 PM
And a rear valence bump...
Posted by: Speedo May 7 2022, 11:55 AM
Still looking for rear tall valence
Posted by: gcrotvik May 7 2022, 09:45 PM
QUOTE(Speedo @ Jan 19 2022, 12:34 PM)
Ok,
Got the GT3 muffler from Ben. Also received several tall rear valance offers from scammers. Needing to source either a tall fiberglass varient or an original 6 valence to copy in fiberglass. Considering louvers or mesh, like shown above. Or if someone has the capability to produce one for a GT3 muffler, send me a PM or email directly.
Patrick Motorsport made a fiberglass 6 rear valance at one time. I don't see it on his web site. Here it is in this picture.
https://patrickmotorsports.com/collections/body-system/products/bod914rgtlid
I'd give Jim a call.
Posted by: mb911 May 8 2022, 06:03 AM
Autoatlanta.com does have them back in stock. I got one a few weeks back.
Posted by: Montreal914 May 9 2022, 08:04 AM
I bought a narrow body fiberglass tall one without the port hole a few years back from A.I.R.
Haven't tried it on yet, still ways to go in my rebuild until I reach this point.
https://americaninternationalracing.com/product/914-6-stock-style-rear-valance/
Best is probably to contact them and tell them what you want.
Good luck!
Posted by: Speedo Jun 22 2022, 05:50 PM
So I am still on the hunt for a six rear valance...steel or FG. Going to use it to make a buck and create a rear valance for Ben's GT3 muffler. Please email me.
Posted by: burton73 Jun 22 2022, 06:36 PM
QUOTE(mb911 @ Jan 3 2022, 05:01 AM)
Does anyone make a flared one ?
Marty at MSDS had them made for flair cars. I got one. May still have it
Bob B
Posted by: mb911 Jun 22 2022, 06:57 PM
I have steel valance flares in the works.
Posted by: Speedo Jun 23 2022, 06:11 AM
QUOTE(mb911 @ Jun 22 2022, 04:57 PM)
I have steel valance flares in the works.
How about non-flared stock?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)