Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB Console Parts
Posted by: NARP74 Feb 1 2022, 01:43 PM
I picked up a decent center console but it had no hardware. I have looked around and asked my local sources, came up empty. Anyone have this lying around and want to let it go? Let me know.
U bracket for console to car body, X1
Screws and washers for the U bracket to body, X2
Screws and washers for the U bracket to the console, X2
Spring clips for the upper gauge pad to the console, have the bracket, X2
Bracket for the lower pad to the console in front, have the clip, X1
Screws for the bracket to the front of the console, X2
Plastic trim filler for the heat lever slot, X1
Screw and washer for the bracket to the car floor mount, X1
Thanks
Posted by: BillJ Feb 1 2022, 02:03 PM
Automobile Atlanta just made all that stuff new.
Posted by: NARP74 Feb 1 2022, 02:08 PM
Well I looked there and could not find any, of course. Then I sent them an email a while ago and got no response. Not sure how to give them my money...
Posted by: BillJ Feb 1 2022, 02:18 PM
Phone call always works for me
Posted by: NARP74 Feb 1 2022, 02:32 PM
I'll try that. Anyone else?
Posted by: FlacaProductions Feb 1 2022, 04:35 PM
https://www.ebay.com/itm/265401509654?hash=item3dcb29a716:g:VK0AAOSwGH1hjZZP
that's one of AA's ebay presence.
Posted by: NARP74 Feb 1 2022, 05:06 PM
Thanks, I only need 2 of those brackets and all of the hardware which isn't mentioned in the ad. I will try to get in touch with them and see if they can do something.
Posted by: rgalla9146 Feb 1 2022, 08:30 PM
Thanks, I only need 2 of those brackets and all of the hardware which isn't mentioned in the ad. I will try to get in touch with them and see if they can do something.
You still need the U bracket ?
I have one ( flat U bracket ) on the shelf but must check that it is not from one of my cars.
I'll check tomorrow.
Posted by: NARP74 Feb 2 2022, 11:14 AM
Thanks, I only need 2 of those brackets and all of the hardware which isn't mentioned in the ad. I will try to get in touch with them and see if they can do something.
You still need the U bracket ?
I have one ( flat U bracket ) on the shelf but must check that it is not from one of my cars.
I'll check tomorrow.
Let me know
Posted by: NARP74 Feb 3 2022, 12:31 PM
Thanks, I only need 2 of those brackets and all of the hardware which isn't mentioned in the ad. I will try to get in touch with them and see if they can do something.
You still need the U bracket ?
I have one ( flat U bracket ) on the shelf but must check that it is not from one of my cars.
I'll check tomorrow.
Any update? @http://www.914world.com/bbs2/index.php?showuser=5176
Posted by: rgalla9146 Feb 3 2022, 02:10 PM
Thanks, I only need 2 of those brackets and all of the hardware which isn't mentioned in the ad. I will try to get in touch with them and see if they can do something.
You still need the U bracket ?
I have one ( flat U bracket ) on the shelf but must check that it is not from one of my cars.
I'll check tomorrow.
Any update? @http://www.914world.com/bbs2/index.php?showuser=5176
I'm sorry for the delay I cannot get to one of the cars ( I have two early )
so have to say I can't help you out.
Posted by: NARP74 Feb 3 2022, 02:33 PM
OK, thanks anyway
Posted by: NARP74 Feb 4 2022, 11:07 AM
Still looking
Posted by: burton73 Feb 4 2022, 12:13 PM
Still looking
Get George on the phone. Always worked for me.
Bob B
Posted by: burton73 Feb 4 2022, 12:14 PM
Still looking
Get George on the phone. Always worked for me.
Bob B
Posted by: PanelBilly Feb 5 2022, 04:24 PM
You don’t need that u. Racket. The thing fits tight between the floor and the dash. Haven’t had one for years. Nothing moves.
Posted by: NARP74 Feb 8 2022, 10:51 AM
I'll try a test fit, thanks. Still need some other bits.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)