Printable Version of Topic

Posted by: mb911 Feb 22 2022, 02:22 PM

This is everything you need for plumbing for a 2.0 to 3.2 if not using any external oil cooler. It has the adapter fittings for the tanks and the engine case. I also can provide the 30mm to -12 adapter for the stock 914-6 oil cooler fitting.

Kits are 375 without the 30mm adapter and 425 with. This can be routed over the bell housing and no need for a hard-line so a huge savings that way plus does not interfere with the engine mount with this setup.

Posted by: roblav1 Feb 22 2022, 04:57 PM

This is a pretty good idea. Routing AN12 from the hard line around the engine mount took some doing.

Posted by: mepstein Feb 22 2022, 05:29 PM

Keep the lines away from the exhaust.
I like kits like this. Saves time and money, otherwise you end up with at least a couple fittings that don’t work and ends up costing more than just buying the right parts from day one.

Posted by: mb911 Feb 22 2022, 08:07 PM

Thanks guys. I think there is a real need for this. I could also do external cooler set ups if there is a demand.

Posted by: Luke M Feb 23 2022, 07:44 AM

Hi Ben,

I'd be interested in two kits for a front mounted oil cooler setup.
One would be running your SS lines so it would need to have some metric 30 mm fittings to mate the two. The other set would be using SS covered AN oil lines with -12 AN fittings. LMK via pm or text so we can figures things out.

Thanks,

Posted by: mb911 Feb 23 2022, 04:46 PM

Luke what cooler are you using up front so I can figure fittings for that?

Posted by: Luke M Feb 23 2022, 08:17 PM

Hi Ben,

Both cars have this PMS setup : https://patrickmotorsports.com/collections/oil-cooling-and-delivery-system/products/oil914207m491pms

My brothers car has -12AN cooler fittings that are welded on the cooler. On my car I can swap fittings on the cooler. I can go 30 mm metric or -12AN. I think if I'm going metric at the engine I'll keep it all metric. My brother is good with -12AN for his car. Both coolers are made by Setrab.

Posted by: racer914 Feb 24 2022, 09:53 AM

I'd be interested in this same setup and I'm using the same Patrick front cooler unit as Luke.

Posted by: Tom1394racing Feb 24 2022, 10:04 AM

Ben

I will be doing a front mounted cooler on my GT project with a 3.0L. I would be interested in a kit for this using your front to rear hard lines, oil tank and anything else I might need including a t-stat

Posted by: Bullethead Feb 24 2022, 10:19 AM

I would also be interested in a kit for remote cooler using your GT hard lines... cooler is the GT replica sold by Volker at F-S-H.

Posted by: mb911 Feb 24 2022, 08:30 PM

Ok so what I am finding is everyone wants to do something different.

If you send me this information I can come up with a kit for you. Your best off emailing me as I no longer get notifications from 914 world. Not sure why

1st what tank stock or mine or pms

2nd engine oil cooler. What fitting is on it

3rd if running front cooler I need to know what fittings are on the cooler and if you plan to imitate the factory routing meaning does It enter the cabin by your feet

4th if yes to 3 are you using my GT lines if so you will need adapters

5th if using a front cooler will you run a t Stat and what kind and where?

If you have a cooler expect a bunch more adapters and costs.

Quick math is an adapter from metric to AN is about $50 shipped to me for example a stock tank and factory 6 cooler will require 3 adapters to AN which will cost $150.. now if using my GT lines you have 4 30mm fittings and that will cost 200 in adapters.

Really happy to help you all do this and can easily do the leg work but I need to know the above items to get you the best and most complete kits. Email mbconsulting21@gmail.com

Thanks again

Posted by: mb911 Feb 24 2022, 08:31 PM

Tom if you could email me mbconsulting21@gmail.com we can get rolling on this.

Thanks

Posted by: mb911 Feb 24 2022, 08:32 PM

If you could email mbconsulting21@gmail.com with fittings in the cooler I can help but need all the particulars I laid out

Thanks

Posted by: mb911 Feb 24 2022, 08:33 PM

Email me your particulars please.

Posted by: mb911 Feb 25 2022, 02:34 PM

Emails sent to everyone that showed interest. I plan to make a few versions so I will regularly stock them for folks.

Posted by: mb911 Mar 1 2022, 06:07 PM

Now I have set-ups for stick oil tanks in stock.