Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Free Body Parts--Last Chance

Posted by: bkrantz Mar 31 2022, 04:16 PM

I just put these body parts by the curb for our annual city trash cleanup. Just in case one of these might be of use to someone, here are some photos. All free for the taking, but the catch is you have to get them. I can hold them for a bit, and there is a small chance I can get them to Albuquerque, Tucson, or Denver in the near future. All are from a 1973 2.0 (probably). Let me know by Monday.

Front and rear bumpers. Were chrome but a PO sanded the surface before painting them black. The rear looks very straight. The front had a slight ding that I was working on before I found better cores for my project. No rust.

Front lid. Straight on the outside but pretty nasty inside, especially along the front underside edge. (BTW, I already salvaged the badge.)

Rear lid. Not too bad, but has some rust coming through the rear channel. Also, the rear edge has the classic slight bow.

Left door. An early 73, so it has the later winding mechanism but no crash bar. Some rust along the bottom seam, and evidence of a repaired ding in the outer skin. I have all the hardware, too.

Left front corner clip. Very straight and only a bit of surface rust, even in the weatherstrip channel. This piece could be boxed and shipped.


Attached image(s)
Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image Attached Image

Posted by: mb911 Mar 31 2022, 04:33 PM

Front bumper I could use for a GT bumper core if willing

Posted by: Front yard mechanic Mar 31 2022, 08:42 PM

I could use the front drivers corner let me know how to get it to Albuquerque thanks Bill

Posted by: bkrantz Mar 31 2022, 09:12 PM

QUOTE(mb911 @ Mar 31 2022, 04:33 PM) *

Front bumper I could use for a GT bumper core if willing


PM sent

Posted by: bkrantz Mar 31 2022, 09:15 PM

QUOTE(Front yard mechanic @ Mar 31 2022, 08:42 PM) *

I could use the front drivers corner let me know how to get it to Albuquerque thanks Bill


PM sent

Posted by: mb911 Apr 1 2022, 05:26 AM

QUOTE(bkrantz @ Mar 31 2022, 07:12 PM) *

QUOTE(mb911 @ Mar 31 2022, 04:33 PM) *

Front bumper I could use for a GT bumper core if willing


PM sent



No PM received still interested

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)