Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Wtd 914 sheet metal

Posted by: slammin May 16 2022, 01:14 PM

Hi I’m looking for a 914 right rear quarter panel from the door to the wheel well opening approximately 12 inches high no dents holes rust etc. thanks for any input Slammin out

Posted by: FlacaProductions May 16 2022, 03:41 PM

Greetings - you may want to update your title so people don't have to read-in to see what you're looking for.

Posted by: 914outlaw May 18 2022, 06:37 AM

@http://www.914world.com/bbs2/index.php?showuser=18325

Attached thumbnail(s)

Posted by: 914outlaw May 18 2022, 06:39 AM

2.

Attached thumbnail(s)

Posted by: slammin May 18 2022, 07:26 AM

Thanks for the reply can you send me a picture of the outside and inside near the door jam the bottom corner I saw the rear corner by the light but I need the front corner thanks Slammin

Posted by: 914outlaw May 18 2022, 09:40 AM

QUOTE(slammin @ May 18 2022, 09:26 AM)

Thanks for the reply can you send me a picture of the outside and inside near the door jam the bottom corner I saw the rear corner by the light but I need the front corner thanks Slammin

Attached image(s)

Posted by: 914outlaw May 18 2022, 09:41 AM

4.

Attached image(s)

Posted by: slammin May 18 2022, 08:46 PM

It’s hard to tell but is it pretty rusty, is it bubbling the paint next the jam mine has holes in the lower corner Looking for one that I could just cut out and patch back into mine rather than making a complicated piece You never said what you wanted for it let me know what the condition is thanks Slammin