I will be parting out a 1970 914 disassembly to begin this memorial day weekend
sheet metal will be the last to go ( I still need some of it)
Let me know what you need. PM or email (scotts3cargarage@gmail.com)
I've never done this before so please be patient. Also not an experienced shipper so again patience.
All prices are obo plus shipping from 64024
Running engine with d-jet $2500
Fuch wheels $1000
Tailshift transmission (condition unknown) $300? (Pending)
Dash has only small cracks $250
Seat needs upholstery (driver's) $150
Seat back pad and passenger cushion $250. (Sold)
do the math.. I'll sell the whole car for 5k but ya gotta act fast! (not the white one) ($9k buys the white one)
disregard date on the pictures, i took em today 5/25/2022
Looks like a typo in your email address above
I’m interested in the steering wheel and all the rusty nuts, bolts, hardware and small pieces you collect as you disassemble the car.
How about the outside Rear View Mirror? Is there 2? What condition? Can you send close up pics?
/
I'm interested in the interior.
PM sent
Pete
I'm interested in the dash top material if it is not torn. This is the upholstery between the dash pad and windshield
Thanks
I'll take all the locks, including door handles, complete ignition assembly, front trunk pull handle with the sleeve, and complete rear trunk lock and button. With or without keys.
Put me down for the transmission.........let me know
totally need the fog light switch if you have it. I have a good pull knob/ face for it so the condition doesn't matter so much. Need the switch. Thanks, Todd
Does it have an early rear view mirror? If so can you post pics?
Sheet metal hey I’m looking for right rear quarter from the door jamb back towards the wheel well approximately 12 inches high by 12 inches long mine is kind of got a bunch of holes in it by the door jam looking for a better piece not sure from the pictures wether yours is on the car yet or not if it’s any good can you let me know and send me some pictures .of the inside and out if you can get them and how much. Thanks slammin
Interested in the gauges.
bare metal dash..lmk
do you have the Motor Mount Base / Support Plate ???
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)