Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FOUND! - used front shocks in "reasonable" shape
Posted by: jrmdir May 27 2022, 10:19 AM
This may be long shot but if anyone has a set of stock-type front shocks that were functioning when removed for a suspension upgrade please let me know. Bilstein or Koni would be awesome but others (except KYB) could be of interest as well.
Thanks,
Ron
Posted by: bdstone914 May 27 2022, 11:46 AM
This may be long shot but if anyone has a set of stock-type front shocks that were functioning when removed for a suspension upgrade please let me know. Bilstein or Koni would be awesome but others (except KYB) could be of interest as well.
Thanks,
Ron
I may have some Boge or Koni.
Can check tomorrow
Posted by: jrmdir May 27 2022, 01:51 PM
This may be long shot but if anyone has a set of stock-type front shocks that were functioning when removed for a suspension upgrade please let me know. Bilstein or Koni would be awesome but others (except KYB) could be of interest as well.
Thanks,
Ron
I may have some Boge or Koni.
Can check tomorrow
Cool - thanks!
Posted by: B2524 May 27 2022, 02:40 PM
I have a set of like new Koni inserts that I want $150 plus shipping for. Excellent shape.
Ships from 93465.
Posted by: jrmdir May 28 2022, 02:43 PM
I have a set of like new Koni inserts that I want $150 plus shipping for. Excellent shape.
Ships from 93465.
Thanks - I'll send a PM.
Ron
Posted by: rfinegan May 28 2022, 06:19 PM
if you do not find what you are looking for....I have a used set of Boges out of my 75 914 I saved when I installed Front Koni (s) to match my rears. Your for free if you picked up or pay the shipping
-Robert
Posted by: jrmdir May 29 2022, 07:23 AM
if you do not find what you are looking for....I have a used set of Boges out of my 75 914 I saved when I installed Front Koni (s) to match my rears. Your for free if you picked up or pay the shipping
-Robert
Thanks so much Robert - I can't pass that up and will send you a PM with my info. This is perfect because I just want something to get me through the driving season before beginning a long, full restoration project this winter. If I bought new inserts they would probably be relics by the time it's back on the road
Thanks also to the others who took the time to respond. This forum is awesome!
Ron
Posted by: rfinegan May 29 2022, 07:46 AM
I have them boxed for the last guy that passed and went with a $$ solution, and will open them up and snap a pic and the dimensions for shipping ...Ill be in the garage today and tomorrow finishing a motor swap! Im driving this week end or bust! Ill post back. Do you need any HW with them? Nuts dust covers and such? I think I had it all included? ill see what I have....
-Robert
Posted by: rfinegan May 30 2022, 12:19 PM
Here is a pic of the nuts, covers, bumpers and shocks . I cycled the shocks in and out and good resistance . One seal was wet , perhaps for being upside down? Anyhow ...this is what I have. USPS flat rear box
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)