Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ SOLD: Defrost rear window: $100 obo plus shipping from 94952

Posted by: tygaboy May 30 2022, 03:11 PM

Defrost rear window. One connector is missing, as pictured.
This can be repaired. See Brent's thread where he did this very thing.

I can't guarantee the defrost works, as I never had it installed. But there's no reason to believe it won't. It looks in good shape, other than that connector. I'm just trying to be transparent. ( lol-2.gif )

I don't have the wiring harness, or switch, just what's pictured.

@http://www.914world.com/bbs2/index.php?showuser=20845 Brent, any chance you could post your pic or add a link to your thread where you did the connector repair? Appreciated!


Attached thumbnail(s)
Attached Image Attached Image Attached Image

Posted by: 914Sixer May 30 2022, 05:58 PM

Take a volt ohm meter and test each line side to side. IF you see a solid short the grid is good.

Posted by: bbrock May 30 2022, 07:45 PM

QUOTE(tygaboy @ May 30 2022, 03:11 PM) *

Brent, any chance you could post your pic or add a link to your thread where you did the connector repair? Appreciated!


Found it. The first repair I did (fabricating a new tab and soldering to the window silver) http://www.914world.com/bbs2/index.php?s=&showtopic=307290&view=findpost&p=2671995

Later the silver the tabs were attached to came off the glass so I repaired using conductive epoxy which http://www.914world.com/bbs2/index.php?s=&showtopic=307290&view=findpost&p=2841435

Posted by: bob164 May 30 2022, 09:04 PM

Chris,
I will take it. I will arrange for Rich to pick it up.

Check your PMs.
Bob

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)