See my pics with the measurements.
Attached image(s)
Thanks Franz
Sorry, geometry does not match up. Narrower spread on the lowers (19-1/2") and the drop is 7" not 5".
Still searching…..
Attached image(s)
AA has reproductions.
I have this one Jim. It will clean up nice. How about $25. plus shipping? Need your zip to determine shipping.
@http://www.914world.com/bbs2/index.php?showuser=643
Attached thumbnail(s)
Attached image(s)
Is the lower left side hole in good condition ?
Attached image(s)
5 min. with a wire brush. Let me know if you want it and your zip code.
Attached image(s)
Jim,
Can you use this one. Made by 914Werke. The drop appears to be 7 inches
Rob
Thanks Rob, as Bruce stated, I need the 1.8 version
Have someone make you one out of stainless to match your muffler
Jim Hoyland. Oh, one of my pictures as a ref. I was looking for that. I was mistaken. I have 2 with solid bolt holes. One has weird bends. The other 2 just need some black rattle can. Send me your mailing address Jim. I'll cover shipping.
Attached thumbnail(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)