I’ve had this muffler for a couple of years. Bought it simply because of its original condition. I’m almost sure it was previously installed but looks like it was used very little. There is some writing on it (sharpie) that does not come off but is very faded. Also has some very small residue inside it. I shook it and was able to get a couple of seeds out. There is still some small scale or seeds that you can hear when you shake it but very very minor. Might even burn out with use. Overall this muffler is in very nice condition. A great piece for a restoration.
$775 plus shipping.
Might help if you mention if its for a 2.0l or 1.7/1.8.
What is the distance between the outlets; for reference, use the midpoints on each side. That is, between each pair of holes, from one side to the other.
For reference:
https://bowlsby.net/914/Classic/zTNT_Exh_MufflerID.jpg
Thanks, I’m definitely 1.8 L
Looking at/for SS or OEM muffler to replace my BURSCH
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)