Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ SOLD - FS: Blaupunkt Radio - Tested Working

Posted by: DennisV Sep 30 2022, 10:32 AM

Blaupunkt radio. Doesn’t have a label, but I am confident it is a Frankfurt. I personally pulled it from the dash of a 1974 914, which I believe it was original to. I planned to use it in our 1970 914-6, but I learned it's not correct for our car.

Pretty darn good for a radio that’s almost 50 years old.
Attached Image
I thought I’d give folks here a shot at it before I throw it on eBay, where people seem to be asking $500+ for tested working units. Asking $250 with USPS priority mail shipping included if you are in the US. I’m OK with PayPal, Zelle, or even personal check if you want to wait for it to clear. If you’re interested, send me a PM and I can share more photos.

Posted by: 914043 Sep 30 2022, 10:58 AM

from what Ive learned radios were dealer installed only. since what they installed was pretty much up to them the Frankfurt model is about as close as youre going to get.

Posted by: 914Sixer Sep 30 2022, 11:02 AM

Please keep in mind Ebay prices are NOT real world prices.

Posted by: 914werke Sep 30 2022, 12:02 PM

QUOTE(914Sixer @ Sep 30 2022, 10:02 AM) *
Please keep in mind Ebay prices are NOT real world prices.
very diplomatic smile.gif

Posted by: DC_neun_vierzehn Sep 30 2022, 05:47 PM

I'll take it PM coming your way.

Posted by: DennisV Sep 30 2022, 07:12 PM

An interested party asked if this was a stereo or mono output unit. To the best of my knowledge, two banana plug style holes is indicative of mono. While still allowing you to connect two speakers.
Attached Image

According to a https://www.bmw2002faq.com/articles/technical-articles/electrical-and-ignition/vintage-blaupunkt-radio-wiring-diagram-r270/

QUOTE
About 1974 these were changed to the "pin and spade" type that only allow you to insert the plug one way, thus specifying positive and negative output. Mono radios use one plug, while stereo units require two.

Hope that helps.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)