Posted by: Highland Feb 19 2023, 03:42 PM
I'm not sure if someone can use this muffler or should it go in the trash. Attached pictures for assessment. It came off a running car.
Free for pickup, North county San Diego.
Posted by: bzettner Feb 19 2023, 10:32 PM
It appears to have a hole/rusted out area/tear in it.
I’d say it’s junk
Posted by: Highland Feb 20 2023, 05:17 PM
Are most 1.7 components like tins, intake runners, pistons and cylinders, and heads junk too?
I'm sure everyone has a spare set in their garage. What do you all do with them?
Posted by: Superhawk996 Feb 23 2023, 10:04 AM
QUOTE(Highland @ Feb 20 2023, 06:17 PM)
Are most 1.7 components like tins, intake runners, pistons and cylinders, and heads junk too?
I'm sure everyone has a spare set in their garage. What do you all do with them?
Learn to weld - make art / yard art
Tin can be converted to 2.0l tin by those in need.
Heads - if no one wants them - use as practice - learn to replace valve guide, do a valve job before it matters. If you have a welder - learn to weld on heads or how to remove valve seats?
Posted by: JamesM Feb 24 2023, 09:18 AM
QUOTE(Highland @ Feb 20 2023, 04:17 PM)
Are most 1.7 components like tins, intake runners, pistons and cylinders, and heads junk too?
I'm sure everyone has a spare set in their garage. What do you all do with them?
If that 73 paper air filter housing is still good someone might want it as a replacement for their oil bath filter. those 2 temp sensors in the plenum work across all d-jet cars and are worth hanging on to. any of that stuff has value to someone looking at converting back to stock from carbs. Not a lot of value given 1.7s are not as popular and there were a lot of them, but for sure not trash.
Posted by: Drex Mar 14 2023, 07:06 PM
is it possible to weld holes shut in mufflers?
Drex