Printable Version of Topic

Posted by: rick 918-S Mar 7 2023, 07:26 AM

Need this ASAP for a friend. His 16 year old daughter is resurecting a fire damaged 74-75 1.8. Anyone have one of these?



Attached image(s)

Posted by: sportlicherFahrer Mar 7 2023, 07:56 AM

I bet @http://www.914world.com/bbs2/index.php?showuser=453 has one. Believe '74 used the same as the Djet cars, and '75 went to that larger one. Different hose sizes and fittings between the intake tube and the valves from year to year.

Posted by: Van B Mar 7 2023, 08:22 AM

Yup. That is specific to cars with EGR i.e. 75 but not 74. Also the 76 912E would have the same valve. recommend pulling the PN from the PET and doing a search. I'm sure there are some out there still.

Posted by: StarBear Mar 7 2023, 10:50 AM

Good for her! Next next generation of teeners ( pun intended) arising.

Posted by: Geezer914 Mar 7 2023, 12:04 PM

Unless you want to be 100% original, or live in CA, you can eliminate the Decel valve.

Posted by: rick 918-S Mar 7 2023, 02:33 PM

Thanks all. They have it bypassed for now so it is running.

Posted by: ClayPerrine Mar 7 2023, 02:38 PM

Great news. So the FI stuff was OK?

Clay

Posted by: rick 918-S Mar 7 2023, 03:40 PM

Yes, they have it running now. the biggest issue they could not get past was the connection at the controller. There is an issue where it does not like to be stressed. So likely corrosion or a small wire repair. and it seems to be sorted. It would start and run rich until it ran out of fuel from the cold start then die. Just stumbled on to the touchy connection.