Printable Version of Topic

Posted by: Dlee6205 Mar 9 2023, 03:00 PM

I have another round of Aluminum rocker panels available! These are about half the weight of an OEM set and look nearly identical. Mounting hardware included. Jackpoint-delete rocker panels are available on a limited basis but the cost remains the same. Please note that these will require some minor form of prep and topcoat. Cost is $200/set+Shipping. Any questions, just ask!

Posted by: Dlee6205 Mar 9 2023, 03:02 PM

Posted by: Superhawk996 Mar 9 2023, 03:31 PM

Cost?

Posted by: DRPHIL914 Mar 9 2023, 03:55 PM

@http://www.914world.com/bbs2/index.php?showuser=27017 awesome this is very good timing. PM me with cost and paypal instructions ill send that asap.

Phil -
i've wanted to get a set for some time!!

Posted by: Dlee6205 Mar 9 2023, 04:21 PM

Whoops! Updated first post.

Cost is still the same. $200 per set+Shipping.

Posted by: Dlee6205 Mar 9 2023, 04:26 PM

PM Sent

Posted by: Van B Mar 9 2023, 09:17 PM

Glad to see you’re alive! Can these be fit with rivets like the factory parts?

Posted by: FlacaProductions Mar 10 2023, 10:08 AM

and if so, are the rivet holes pre-drilled?

Posted by: Superhawk996 Mar 10 2023, 11:58 AM

Based on others that you’ve sold what is the approx. shipping? Are we talking $50 or more like $100+ due to length and UPS oversize?

I really like the idea that they are less weight than OEM. Always looking to trim weight. I don’t know how didn’t see these if you were offering them before. Nice job offering them!

Posted by: Dlee6205 Mar 10 2023, 01:36 PM

I don't see why you couldn't use the rivets but there are no holes. I've never used the rivets for these aluminum sets but your result may vary.

Posted by: Dlee6205 Mar 10 2023, 01:37 PM

I've seen shipping anywhere from $40 to $90 for a set.

Posted by: Van B Mar 10 2023, 05:05 PM

Doug please do all of us and your sales a favor and post up some proper product photos. I’m literally waiting for since you were MIA with your ad in the vendor section.

Please show:
- all sides of the part as delivered
- top, door open photos as mounted
- bottom detail photos as mounted

Standing by with my credit card

Van

Posted by: flmont Mar 11 2023, 12:47 AM

Iam in for a set..Thanks !

Posted by: Dlee6205 Mar 29 2023, 05:58 PM

Posted by: East coaster Mar 30 2023, 05:35 AM

I received mine and they look great…….well done!

Posted by: DRPHIL914 Mar 30 2023, 06:29 AM

got mine over a week ago, man those came fast, Thanks! going to take my time getting these prepped and fit and painted before installing. Thanks for the fast shipping

Dr. Phil,
!
- what i really want to do is just leave them as is and clear coat them ! if i had a silver or black car i think thats what i would do!

Posted by: 914werke Mar 30 2023, 08:26 AM

I have. These are very nice & as commented do have the marks from the break press that need to be worked on before finishing but not bad.
If planning to use the plastic rivits take your time & get the locations right prior to driling!!

Posted by: Dlee6205 Mar 30 2023, 09:48 AM

I'm working on the tooling mark issue. It was improved for this batch. Next batch it should almost be eliminated.

Posted by: 914werke Mar 30 2023, 12:47 PM

Posted by: sixnotfour Apr 2 2023, 01:49 PM

Posted by: Dlee6205 Aug 21 2023, 07:43 PM

Still have some available. Also have some without the jackpoint holes.