I've started a 914 GT project and like I did with my 911ST project I like to get close to the original cars from the days.......
So I wanted a set of REPA racing harnesses, but wanting and being able to get is a totally different thing right
I've only been able to find 1 set sold at an auction and a single harness sold at an auction.....
I had the same with my ST project and was able to create a couple sets of the racing harness myself. A good friend of mine had an original set, and I started making the hardware required and collecting original webbing etc. and had a couple sets stitched by a professional seatbelt stitching company that could also replicate the Repa stitching pattern and all the labels correctly.
Next step now was to create a set for my GT project. The gathering of information and parts for that started a couple years ago, because the GT project was already in my mind for a while. I used a lot of the pictures from the pbase sites from original cars and figured out how they were stitched and what components were used.
I have 2 handed sets (left+right buckle position) and two non handed sets.
Pictures of the sets and how I created them here: https://drive.google.com/drive/folders/1YI15AufsDt2z6P-1HNgs366FD9lUWCx1?usp=sharing
+++++++++++ ALL Sets are SOLD +++++++++++++
Attached thumbnail(s)
Really neat for a street car GT replica!
PM sent
- Tony
What is meant by none handed set?
911 2.2 I sent you a PM.
Mark
All sets are sold
All sets are sold
+++++++++++ All sets are sold Now. +++++++++++++
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)