Printable Version of Topic

Posted by: AnthonyM Jul 15 2023, 08:35 AM

I'm just now getting my 914-6 GT replica running and will likely be using it for track day events and some street use. It has 2.7 CIS conversion with a Tri-Mil muffler (dual in single out) and headers. I'm looking for a muffler with more sound and better exhaust flow. Would prefer 2 in and 2 out.

Posted by: ChrisFoley Jul 16 2023, 07:46 AM

I'll take pics of the mufflers I have at my shop to show you what I have.

Posted by: ChrisFoley Jul 17 2023, 12:08 PM

Here are some pics of the 3 mufflers I have available.
The Dansk has a bunch of welds on the outside so someone already modified the insides. I don't recall where I got it or what was done to it.
The next one was behind a 2.7L with 1 3/4" headers.
More than 20 years ago I installed the single outlet muffler with a set of B&B HE's on a 2.7L built by Motormeister. Eventually the customer ended up with a 3.6L and left the muffler here after buying one of my mufflers to fit behind his WEVO 915.

Posted by: JmuRiz Jul 17 2023, 02:13 PM

Here’s what I have: old M&K that needs some rewelding and a bursch:




Attached thumbnail(s)

Posted by: JmuRiz Jul 17 2023, 02:16 PM

…if interested in the bursch, I’ll hit it with the wire wheel and the VHT primer and paint I got for it (but haven’t got around to spraying yet)


Attached thumbnail(s)

Posted by: AnthonyM Jul 17 2023, 07:43 PM

I've sent you both PM's on your muffler options and really appreciate you letting me know what might work for my build. Thanks again!

Posted by: Robarabian Jul 17 2023, 10:12 PM

I'd be curious to know how loud that Super Turbo muffler is... it is pretty small.

Had you heard it when it was on the motormeister motor car?

QUOTE(ChrisFoley @ Jul 17 2023, 11:08 AM)

Here are some pics of the 3 mufflers I have available.
The Dansk has a bunch of welds on the outside so someone already modified the insides. I don't recall where I got it or what was done to it.
The next one was behind a 2.7L with 1 3/4" headers.
More than 20 years ago I installed the single outlet muffler with a set of B&B HE's on a 2.7L built by Motormeister. Eventually the customer ended up with a 3.6L and left the muffler here after buying one of my mufflers to fit behind his WEVO 915.

Posted by: ChrisFoley Jul 18 2023, 09:09 AM

QUOTE(Robarabian @ Jul 17 2023, 11:12 PM)

Posted by: mate914 Jul 18 2023, 03:42 PM

What do you want for the Bursch?
Matt

QUOTE(JmuRiz @ Jul 17 2023, 04:16 PM)

Posted by: AnthonyM Jul 20 2023, 08:26 AM

Thanks to all of the input and options on mufflers for my build. I ended up choosing the M&K from Nathan and think in will fit my build the best and sound great too.


Attached image(s)

Posted by: JmuRiz Jul 20 2023, 09:46 AM

That's funny, looks like a CIS 2.7 and the same headers I was going to run before my project took a $$ turn due to the core engine needing a full redo.

Posted by: rgalla9146 Jul 22 2023, 09:32 AM

What a great looking car !
Those are big rear flares.
Any chance the car came from Pennsylvania ?

Posted by: AnthonyM Jul 26 2023, 07:30 PM

Thanks. I really like the flares on this car too and appear to be wider than most GT options. I'm not sure if the car was in PA before I purchased it and saw that it had been in the Carolina's prior to me buying it. It came out of Indiana when I got it a few years ago.