Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB passenger side 914-6 heat exchanger or sell driver side
Posted by: mb911 Oct 11 2023, 04:15 PM
I have one odd ball repaired driver side heat exchanger that I need a mate to or will sell the driver side unit for $600. This one has had some surgery from the previous owners and I ground the nasty weld out and then did a nice TIG weave over to blend pretty nicely. Then sand blasted and then primed in high heat grey paint. As I said I am open to either option.
Let me know what you have. I am all about fixing the rough heat exchangers
Posted by: nditiz1 Oct 11 2023, 05:18 PM
Man if I still had my 6.
1 is all you really need.
Posted by: dug Oct 11 2023, 08:33 PM
I have a rusty pair that need repair, but seem like they could be saved. I'm travelling until Monday, but I'll send you pics when I get back.
Posted by: mb911 Oct 12 2023, 11:01 AM
I have a rusty pair that need repair, but seem like they could be saved. I'm travelling until Monday, but I'll send you pics when I get back.
You would be amazed what I can save
Posted by: mepstein Oct 12 2023, 11:03 AM
I sent you the good one. What until you see the rusty ones.
Posted by: mb911 Oct 13 2023, 04:20 AM
I sent you the good one. What until you see the rusty ones.
The good one is in a good home with a nice matching set. This one is another oddball straggler
Posted by: fixer34 Oct 14 2023, 03:44 PM
I have a rusty pair that need repair, but seem like they could be saved. I'm travelling until Monday, but I'll send you pics when I get back.
You would be amazed what I can save
I'm guessing you have a frame/jig to align everything? Bought a reconditioned set from Camp914 some 15 yrs ago, one side had weld repair done by the junction. Seems like that flange is not quite perfectly straight when bolting to the muffler. May pull them off once I put her up for the winter and take a ride up your way so you can take a look.
Posted by: mb911 Oct 15 2023, 05:16 AM
I have a rusty pair that need repair, but seem like they could be saved. I'm travelling until Monday, but I'll send you pics when I get back.
You would be amazed what I can save
I'm guessing you have a frame/jig to align everything? Bought a reconditioned set from Camp914 some 15 yrs ago, one side had weld repair done by the junction. Seems like that flange is not quite perfectly straight when bolting to the muffler. May pull them off once I put her up for the winter and take a ride up your way so you can take a look.
Yes I do. Luckily most of the recent repairs I have done are just the heat shrouds that needing repair. But either way I have a fixture
Posted by: mb911 Oct 18 2023, 03:28 PM
Just for those looking for a picture here it is. Make an offer on it need to fund the transaxle project 
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)