Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB Early brake caliper parts
Posted by: Archie Dec 20 2023, 06:50 PM
WTB early (Single bleeder) rear brake caliper parts.
4 brake line tube nuts. 2 short Ribe through-bolts and nuts.
Shipping to 98230 please. Thanks.
Posted by: davep Dec 20 2023, 09:57 PM
What is the length of the bolts from under the head to the end of the threaded section. I have a few lengths in my parts.
Posted by: bdstone914 Dec 21 2023, 10:52 AM
@http://www.914world.com/bbs2/index.php?showuser=10844
I have brake line nuts that just got yellow zinc plated.
If you dont get the bolts from Dave i could pull from a pair of calipers.
I think there are two lenghts of the bolts with inner and outer bolts being different lenght.
Posted by: bdstone914 Dec 21 2023, 12:08 PM
@http://www.914world.com/bbs2/index.php?showuser=10844
I have brake line nuts that just got yellow zinc plated.
If you dont get the bolts from Dave i could pull from a pair of calipers.
I think there are two lenghts of the bolts with inner and outer bolts being different lenght.
Yes two lenghts only one is good. Other was cut to remove.
Attached thumbnail(s)
Posted by: Archie Dec 21 2023, 12:08 PM
What is the length of the bolts from under the head to the end of the threaded section. I have a few lengths in my parts.
Hi Dave,
I need the shorter bolts, that mic out at 1.770" or 44.94mm.
Posted by: Archie Dec 21 2023, 12:11 PM
P.S. I'm in Vancouver, so please ignore the US postal address. I'm at V5Z 1B5. Thanks.
Posted by: davep Dec 24 2023, 02:01 PM
Sorry for the delay. I have the bolts you need, and nuts to go with them. I'll dig a bit deeper and see if I have the tube nuts as well. I did have lots, but most were welded up to use as plugs.
Posted by: Archie Dec 25 2023, 03:53 PM
Sorry for the delay. I have the bolts you need, and nuts to go with them. I'll dig a bit deeper and see if I have the tube nuts as well. I did have lots, but most were welded up to use as plugs.
It's Christmas, Dave! Everything's out the window at this end! No panic.
Posted by: Archie Jan 24 2024, 04:50 PM
@http://www.914world.com/bbs2/index.php?showuser=10844
I have brake line nuts that just got yellow zinc plated.
If you dont get the bolts from Dave i could pull from a pair of calipers.
I think there are two lenghts of the bolts with inner and outer bolts being different lenght.
Hi again, BDS!
So, here I find myself at the back-end of January with two caliper-half bolts and NO tube nuts, so I was wondering if you still have a couple of them you might want to sell me?
Thanks
Posted by: Archie Jan 25 2024, 07:22 PM
@http://www.914world.com/bbs2/index.php?showuser=10844
I have brake line nuts that just got yellow zinc plated.
If you dont get the bolts from Dave i could pull from a pair of calipers.
I think there are two lenghts of the bolts with inner and outer bolts being different lenght.
Hi again, BDS!
So, here I find myself at the back-end of January with two caliper-half bolts and NO tube nuts, so I was wondering if you still have a couple of them you might want to sell me?
Thanks
Hi again, BDS.
Please disregard my last to you. I've found those tube nuts locally. Thank goodness, I'm way behind on this thing as it is!
Sorry to have bothered you!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)