Posted by: BillC Jan 20 2024, 05:17 PM
I need a correct Cylinder Head Temp (CHT) Sensor for my '73 2.0. I need this part:
022 906 041 A (Porsche/VW part number) and/or 0 280 130 017 (Bosch part number).
My engine had an unlabeled sensor in there, and I have a couple of 012 sensors (which are correct for later 2.0's, but not '73s).
Please let me know what you have. Thanks!
P.S. I already have the ballast resistor to go with the sensor. So, just need the correct sensor.
Posted by: Dlee6205 Jan 20 2024, 06:24 PM
Not cheap.
https://www.ebay.com/itm/256182904428?epid=252765236&hash=item3ba5b0e66c:g:8BgAAOSwNupk2rWN&amdata=enc%3AAQAIAAAAwNGpv1lNRO7zqGhGHcgcw065X9vrYH% 2BP1Bc1lzHuESamKwt9izi1oW6v0ThOofek8lFxXHyDwlGlKGo0OpzbCGCMoRQDHWYooP6beP6hWCFPD
JJTYkxgw%2Fvnou%2FmLG% 2F2SPZocGlKEMnZjVL40z5AUcZg3Gh6PLABP4ZZK93zd5LSBgwYA6cJ9lKIN0K3hIO3FXJqOsMiz11kh
onn9ri9YC2vjjWCBv7YMLUohWxjPtUpzXBwXp0uincrmyNAX3cjoQ%3D%3D%7Ctkp%3ABk9SR-jRuJalYw
Posted by: BillC Jan 20 2024, 06:56 PM
QUOTE(Dlee6205 @ Jan 20 2024, 07:24 PM)
Not cheap.
https://www.ebay.com/itm/256182904428?epid=252765236&hash=item3ba5b0e66c:g:8BgAAOSwNupk2rWN&amdata=enc%3AAQAIAAAAwNGpv1lNRO7zqGhGHcgcw065X9vrYH% 2BP1Bc1lzHuESamKwt9izi1oW6v0ThOofek8lFxXHyDwlGlKGo0OpzbCGCMoRQDHWYooP6beP6hWCFPD
JJTYkxgw%2Fvnou%2FmLG% 2F2SPZocGlKEMnZjVL40z5AUcZg3Gh6PLABP4ZZK93zd5LSBgwYA6cJ9lKIN0K3hIO3FXJqOsMiz11kh
onn9ri9YC2vjjWCBv7YMLUohWxjPtUpzXBwXp0uincrmyNAX3cjoQ%3D%3D%7Ctkp%3ABk9SR-jRuJalYw
Ouch! You're not kidding.
Anyone have a good used one, at a more-reasonable price?
Posted by: Quinn Moore Jan 21 2024, 06:11 PM
QUOTE(BillC @ Jan 20 2024, 06:56 PM)
QUOTE(Dlee6205 @ Jan 20 2024, 07:24 PM)
Not cheap.
https://www.ebay.com/itm/256182904428?epid=252765236&hash=item3ba5b0e66c:g:8BgAAOSwNupk2rWN&amdata=enc%3AAQAIAAAAwNGpv1lNRO7zqGhGHcgcw065X9vrYH% 2BP1Bc1lzHuESamKwt9izi1oW6v0ThOofek8lFxXHyDwlGlKGo0OpzbCGCMoRQDHWYooP6beP6hWCFPD
JJTYkxgw%2Fvnou%2FmLG% 2F2SPZocGlKEMnZjVL40z5AUcZg3Gh6PLABP4ZZK93zd5LSBgwYA6cJ9lKIN0K3hIO3FXJqOsMiz11kh
onn9ri9YC2vjjWCBv7YMLUohWxjPtUpzXBwXp0uincrmyNAX3cjoQ%3D%3D%7Ctkp%3ABk9SR-jRuJalYw
Ouch! You're not kidding.
Anyone have a good used one, at a more-reasonable price?
$25
https://www.aasesales.com/products/da6g-a109-d-u64-10i-113848?_pos=1&_sid=fd1f52205&_ss=r
Posted by: BillC Jan 22 2024, 06:46 AM
QUOTE(Quinn Moore @ Jan 21 2024, 07:11 PM)
$25
https://www.aasesales.com/products/da6g-a109-d-u64-10i-113848?_pos=1&_sid=fd1f52205&_ss=r
Thanks for the link, but unfortunately for me, those are 012 CHT sensors. I need an 017 sensor. You can see the part numbers listed on Brad Anders' page: https://members.rennlist.com/pbanders/DJetParts.htm
Aase is selling
311 906 041 A, and I need
022 906 041 A. The part numbers are the same except for the first three digits.
Posted by: Olympic 914 Jan 22 2024, 08:59 AM
The difference in resistance is only when cold.
017 = 1600 ohm
012 = 3200 ohm
But when hot both are ~ < 100 ohm
( these numbers are from memory, so could be off a little )
When you add the resistor you should be good.
especially after the engine is warmed up a bit.
So IMHO the 012 will work for you, but good luck with your search for the CORRECT one.
Posted by: Jett Jan 22 2024, 09:20 AM
QUOTE(Dlee6205 @ Jan 20 2024, 04:24 PM)
Not cheap.
https://www.ebay.com/itm/256182904428?epid=252765236&hash=item3ba5b0e66c:g:8BgAAOSwNupk2rWN&amdata=enc%3AAQAIAAAAwNGpv1lNRO7zqGhGHcgcw065X9vrYH% 2BP1Bc1lzHuESamKwt9izi1oW6v0ThOofek8lFxXHyDwlGlKGo0OpzbCGCMoRQDHWYooP6beP6hWCFPD
JJTYkxgw%2Fvnou%2FmLG% 2F2SPZocGlKEMnZjVL40z5AUcZg3Gh6PLABP4ZZK93zd5LSBgwYA6cJ9lKIN0K3hIO3FXJqOsMiz11kh
onn9ri9YC2vjjWCBv7YMLUohWxjPtUpzXBwXp0uincrmyNAX3cjoQ%3D%3D%7Ctkp%3ABk9SR-jRuJalYw
Btw. Part sold… someone wanted it.
Posted by: Al Meredith Jan 22 2024, 03:51 PM
I have 6 cylinder head Sencers and they are so small where do they put the number .some have no number the rest have a three digit number like 772 . is it the last 3 digit you are looking for ?