FS: 1987 GM Corvette V8 Engen with Aluminum D heads rebuilt
with Ferrari Factory Muffler Set $700. OBO
I bought this Engen as a rebuilt crate Engen 15 years ago.
The guy said it was totally rebuilt to stock bore and stroke.
I was removing the Fuel injection from it and found that it was not on tight, and I wanted to know just what I had. When I got the heads off, I could see just how clean it was, but there was some small scoring on the cylinder walls. Looks like the chain is new and well as a number of other parts. I was changing to a GM Hot Cam kit and with Carb it should would out 400 or so HP. I changed directions and now it needs to leave its home here. You can see that the heads are rebuilt. I paid $1,700 for it. Sold the injection and some other parts many years ago. I have the early front 60s GM pully. I have a GM Alienator as well. You can control the Ferrari muffler sound volume by the Vacuum. Nice touch. The Distributor was from an old 350 that was in in 914 I bought with 930 Porsche Trans same as the Aluminum Intake, not 100% sure that Dist will work.
I do not want to ship it out so someone in California would be best. On the stand $600 OBO
I have more detailed pictures sent to your email if you send it to me. It also comes with Ferrari Factory Muffler Set for $600.OBO
Thanks,
Bob B Burton. Inglewood CA
[attachmentid=904318)
Attached thumbnail(s)
Attached image(s)
Bump lower price
Bob B
Right before I pulled the heads off. Would be a great eng for a 914 Chevy conversion
Fresh aluminum Vett D port heads. 24 Lb each
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)