Printable Version of Topic

Click here to view this topic in its original format _ FS/WTB: 914 Parts _ WTB Oil cooler shroud/ 2.0t fly wheel and starter ring gear to mate to 914 901

Posted by: pete-stevers Jun 9 2024, 04:05 AM

Looking for GT oil cooler shroud(or kit), and a flywheel with ring gear for a 2.0t motor to mate to a 914 901
open to suggestions as well

Posted by: 914werke Jun 9 2024, 07:14 PM

Sold the flywheel but still have the ring gear nos friction disc & pressure plate(s)


Posted by: live free & drive Jun 10 2024, 07:31 AM

I have to sell an unused Patrick Motorsports lightweight flywheel (225mm, 6 bolt), assuming the 2.0T is for a six. I'll throw in for free a new high performance clutch disc if you want it too. PM me if interested

Posted by: Steve Jun 10 2024, 09:43 AM

He's looking for a 914-6 flywheel that is also used for the 2.0 911 six. Unless he is using the rare 71 specific 901 that uses a 225mm pull clutch. The 215mm flywheel works with a 914/901 trans. 2FU5L0n0ygyOjEXg2chIgThxUf30KSTpPNa7elDagk71OapfF8KZGyyvd3r5mhNBh016Pz6pBYq1WvKN
This is a 215mm flywheel that works with 6 bolt 911 cranks (2.0-2.7). This is what I used with my 2.7 and had no slipping issues with a stock 2.0 pressure plate and disk.
Getty Design sells the two piece shroud.
Patrick Motor sports sells a complete shroud kit with oil cooler.

Posted by: pete-stevers Jun 26 2024, 08:02 AM

Thanks Steve!

Powered by Invision Power Board (
© Invision Power Services (