Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS: J tube block off plate set for cars with deleted heat system.
Posted by: bdstone914 Jul 6 2024, 07:09 PM
Edit; I have 10 more sets ready.
These plates cover the holes for the J tubes in the top cylinder tins when the heat system has been deleted. Leaving the holes open allows the engine to suck hot air from below the tin.
The set consists of two plates and mounting hardware. The plates are mild steel and powder coated satin black.
I now include a speed nut with screws and washers for easier installation. The speed nut clips to the inside of the J tube hole.
Price is $30 for a set including shipping in the U.S.
Attached thumbnail(s)
Posted by: Freezin 914 Jul 6 2024, 08:57 PM
Do you have multiples of these? I would be interested in the near future.
Posted by: bdstone914 Jul 6 2024, 09:11 PM
@http://www.914world.com/bbs2/index.php?showuser=17687
' date='Jul 6 2024, 07:57 PM' post='3155131']
Do you have multiples of these? I would be interested in the near future.
[/quote]
Yes. I have five finished sets and another five sets cut and need forming and powder coating.
Posted by: Freezin 914 Jul 7 2024, 06:20 AM
[quote name='bdstone914' date='Jul 6 2024, 10:11 PM' post='3155136']
@http://www.914world.com/bbs2/index.php?showuser=17687
' date='Jul 6 2024, 07:57 PM' post='3155131']
Do you have multiples of these? I would be interested in the near future.
[/quote]
Yes. I have five finished sets and another five sets cut and need forming and powder coating.
[/quote]
Excellent, I will be looking to purchase a set soon. Just need to fix a fuel injector issue that came up. Thank you. 
Posted by: bdstone914 Jul 7 2024, 07:31 AM
[quote name='Freezin 914' date='Jul 7 2024, 05:20 AM' post='3155149']
[quote name='bdstone914' date='Jul 6 2024, 10:11 PM' post='3155136']
@http://www.914world.com/bbs2/index.php?showuser=17687
' date='Jul 6 2024, 07:57 PM' post='3155131']
Do you have multiples of these? I would be interested in the near future.
[/quote]
Yes. I have five finished sets and another five sets cut and need forming and powder coating.
[/quote]
Excellent, I will be looking to purchase a set soon. Just need to fix a fuel injector issue that came up. Thank you.
[/quote]
I will set aside a set for you. I have these also listed on facebook and sold three sets already.
Posted by: technicalninja Jul 7 2024, 09:16 AM
Those are pretty neat!
Blend in perfectly, look "Porsche"!
Well done! 
Posted by: bdstone914 Jul 7 2024, 10:56 AM
Those are pretty neat!
Blend in perfectly, look "Porsche"!
Well done!
Thank you. I wanted them to look like OEM parts including the screw type.
Posted by: technicalninja Jul 7 2024, 11:02 AM
The VERY best mods don't look like mods...
It's what I label "Transparent".
I strive to achieve either transparent or full-on steam punk with intricate details (Like Tygaboy!).
Those look like they "belong" and have been there since the start.
"Transparent" as it gets...
Might be fun to run those through a concours (I'd use an original pan head bolt) and see how the judges react!
Might be some head scratching at first.
I would expect them to bust you however!
Singles might be applicable to folks with the stock York AC as the passenger side was often disabled anyway.
Posted by: GBX0073 Jul 7 2024, 11:23 AM
Great timing a chance to Support Bruce
I will take a set
Posted by: Freezin 914 Jul 7 2024, 11:48 AM
[quote name='bdstone914' date='Jul 7 2024, 08:31 AM' post='3155180']
[quote name='Freezin 914' date='Jul 7 2024, 05:20 AM' post='3155149']
[quote name='bdstone914' date='Jul 6 2024, 10:11 PM' post='3155136']
@http://www.914world.com/bbs2/index.php?showuser=17687
' date='Jul 6 2024, 07:57 PM' post='3155131']
Do you have multiples of these? I would be interested in the near future.
[/quote]
Yes. I have five finished sets and another five sets cut and need forming and powder coating.
[/quote]
Excellent, I will be looking to purchase a set soon. Just need to fix a fuel injector issue that came up. Thank you.
[/quote]
I will set aside a set for you. I have these also listed on facebook and sold three sets already.
[/quote]
Thank you, I plan to purchase them next week. Thank you again!
Posted by: bdstone914 Jul 7 2024, 12:13 PM
The VERY best mods don't look like mods...
It's what I label "Transparent".
I strive to achieve either transparent or full-on steam punk with intricate details (Like Tygaboy!).
Those look like they "belong" and have been there since the start.
"Transparent" as it gets...
Might be fun to run those through a concours (I'd use an original pan head bolt) and see how the judges react!
Might be some head scratching would expect them to bust you however!
Singles might be applicable to folks with the stock York AC as the passenger side was often disabled anyway.
I could sell singles.ll
Posted by: bdstone914 Jul 7 2024, 12:17 PM
@http://www.914world.com/bbs2/index.php?showuser=25007
' post='3155221' date='Jul 7 2024, 10:23 AM']
Great timing a chance to Support Bruce
I will take a set
[/quote]
I am sold out but have ten more pairs ready for paint. Will be a couple days.
Posted by: DRPHIL914 Jul 9 2024, 06:23 AM
[quote name='bdstone914' date='Jul 7 2024, 02:17 PM' post='3155227']
@http://www.914world.com/bbs2/index.php?showuser=25007
' post='3155221' date='Jul 7 2024, 10:23 AM']
Great timing a chance to Support Bruce
I will take a set
[/quote]
I am sold out but have ten more pairs ready for paint. Will be a couple days.
[/quote]
@http://www.914world.com/bbs2/index.php?showuser=1319
Bruce, i will take a set when you complete them , i could wait for Okteenerfest for delivery ifyou are still coming,
Phil
Posted by: bdstone914 Jul 9 2024, 07:04 AM
@http://www.914world.com/bbs2/index.php?showuser=11106
Bruce, i will take a set when you complete them , i could wait for Okteenerfest for delivery ifyou are still coming,
Phil
[/quote]
They will be ready today or tomorrow.
Not sure about coming to Octeenerfest.
Injured my knee and getting abound is an issue.
The price includes shipping.
Bruce
Posted by: GBX0073 Jul 9 2024, 09:06 AM
Bruce I am still in for a set no need to rush [quote name='bdstone914' date='Jul 9 2024, 08:04 AM' post='3155552']
@http://www.914world.com/bbs2/index.php?showuser=11106
Bruce, i will take a set when you complete them , i could wait for Okteenerfest for delivery ifyou are still coming,
Phil
[/quote]
They will be ready today or tomorrow.
Not sure about coming to Octeenerfest.
Injured my knee and getting abound is an issue.
The price includes shipping.
Bruce
[/quote]
Posted by: bdstone914 Jul 9 2024, 03:19 PM
@http://www.914world.com/bbs2/index.php?showuser=25007
@http://www.914world.com/bbs2/index.php?showuser=17687
I have ten more pair finished.
Posted by: Shivers Jul 10 2024, 06:52 AM
Wow, those are great
Posted by: bdstone914 Jul 10 2024, 07:06 AM
@http://www.914world.com/bbs2/index.php?showuser=24781
date='Jul 10 2024, 05:52 AM' post='3155752']
Wow, those are great
[/quote]
Thank you. Do you want a pair?
Posted by: Shivers Jul 10 2024, 07:59 AM
[quote name='bdstone914' date='Jul 10 2024, 06:06 AM' post='3155755']
@http://www.914world.com/bbs2/index.php?showuser=24781
date='Jul 10 2024, 05:52 AM' post='3155752']
Wow, those are great
[/quote]
Thank you. Do you want a pair?
[/quote]
Just had to pay to have my home air conditioner repaired.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)