So I have a few people looking for these but thought I would speed thngs up a little. If you happen to have some of these sitting around please help a friend out
I am doing the 944 CV conversion on my car and have everything except for these.
I am told they come off a late 915 transmission and need to be the 100mm coarse splined output flanges, or ears as some call them.
Thanks guys
I just thought I would let you all know I still have not found a set to use Feel free to jump in if you have some
jon i have this out of a 911/01,i believe they are bigger then 100mm,i check tomorrow
Attached image(s)
I need these
Attached image(s)
So after measuring the VVs these will go on I came to find that the CV is right at 100mm and the center of the bolt hole to the other measures about 85mm. Soooooo... anyone have some?
How did those you teased me with measure Thomas?
they are 108mm,sorry
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)