Change in plans leads me to offer this
(I also have a new (never started) sbc w/ afr heads
and complete Renegade system that could be included
in a package deal.)
1987 930 box pulled from turbo with 40K miles
Bellhousing shortened and ring and pinon flipped by Bobby Hart
All new syncros
All new dog teeth
New sliders/selectors
New Bearings
All under 1000 miles
New Quaiffe Limited Slip (under 500miles)
Running Swepco 201 oil
All work performed by Allan Faragalah at Aase Motorsport
Pair of 930 halfshaft/axles w/cv's
Kennedy 930 V8 flywheel w/
930 starter ring gear
Modified 930 Clutch, balanced to Kennedy Flywheel
Stock 930 disk (new)
930 throw out bearing
Cable shifter complete
High Torque starter
custom 914 clutch cable bracket and pully and the custom tranny bracket to mount to the stock tranny location.
All under 1000 miles
$7100
Located in foothills between Sacramento and Lake Tahoe
Pat,
what happened? I thought you were gonna put it all back together and get it running. I was gonna give you a call to see how things were going.
(I also have a new (never started) sbc w/ afr heads
Cable shifter complete
What is the story on these? Will you split the group and how much?
Bob
PM sent
I would like to know the story on the SBC Power and price. This is just a good place to sell it as any.
Bob
Pat, A friend on the forum alerted me to this post and I'm very interested in the package. I have a 914 converted to a DZ302 V8, but it still has a 901 in it.
I'll PM you my contact info. I live near Lake Folsom, so it sounds like we are fairly close to one another.
Talk to you soon.
Doug
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)