Printable Version of Topic

Posted by: wallys914 Feb 6 2009, 04:09 PM

Wanted a motor mount like this....

Posted by: 914Sixer Feb 6 2009, 05:33 PM

They are the same as the transmission mount on Early cars 70-72. New ones are no longer available. Get some 911 motor mounts and replace both of them. 911 one will last for ever. About $30 each if you shop around.

Posted by: wallys914 Feb 7 2009, 04:11 PM

I need the Entire mount, not the part that bolts in but the part that is spot welded on to the long like shown in the picture the nasty rusted thing!

Posted by: FourBlades Feb 7 2009, 05:45 PM

Someone doing a six conversion will have one for you. I have a driver's side
mount I got from Mark, but it looks like you need the passenger side.

John

Posted by: wallys914 Feb 8 2009, 03:42 PM

Si!

Passenger side entire motor mount, Any one got one? any sixer conversion someone can hack this out of?

Posted by: xperu Feb 8 2009, 05:26 PM

Hi, I have New Motor Mount that I never installed that I never used. Porsche # 914 501 184 10. I had posted it a couple of week ago on the forum classified for $125. + shipping. The deal still stands, a new one will cost you around $500 and a use about $200 or maybe some one can remove a good one from a parts car for less. Mike
I also have a hinge assembly to pan if you are repairing or replacing your pan. $25. + shipping

Posted by: wallys914 Feb 12 2009, 04:30 PM

AnyONE? Got this?

Posted by: 914Sixer Feb 12 2009, 09:28 PM

Yes, I can cut one out for you. I will need a couple of days.
Thanks,
Mark

Posted by: naro914 Feb 18 2009, 03:21 PM

Really? I still use my mounts with the six conversions....how do you mount the engine then? (sorry to hijack, but this intriged me)

Posted by: wallys914 Feb 18 2009, 06:20 PM

With a Rich Johnson Mount, it Mounts to the fire wall and then to the front bulkhead....

Posted by: naro914 Feb 19 2009, 02:44 PM

Ah, ok. I use the older Patrick Motorsports mounts that use the stock mount points.

Posted by: wallys914 Feb 27 2009, 07:31 PM

any one have a clean passenger side Motor Mount like above? Thought i'd ask again.

Posted by: bdstone914 Feb 28 2009, 12:01 AM

Chris,

I have a car that needs to be cut up. The mount may be good enough for what you want. If you want to cut it out it is yours. I can get some pics or if you want to come by you can check it out. I will be around Sunday.

Bruce

Posted by: wallys914 Apr 2 2009, 11:22 AM

BUMP? I am still looking if anyone has a New one Please PM