Printable Version of Topic

Posted by: 914runnow Feb 16 2009, 09:21 PM

Out of my 75 2.0....Which will be a 1.8.....
(yep I am putting a smaller engine in it)???!!
>>>>>Includes= the' Bent Handle' heat bar !!!!!!!!<<<<
PLEASE NOTE..the handle assy. is NOT shown........
BUT in the Box READY to ship..
=OEM Clock ..>IT WORKS!!
=Volt meter>It works...
=Temp Gauge..2 heat ranges to choose from..(early/ late)
=Leather shift boot
=Gauge 3 hole vinyl panel>
=the top has a slight seam malfunction apart..
(Please note..Will NOT been seen when mounted..)
=Sides and front..No rips or tears.. slight scuffing by the drvr foot..
=Top Mount Bracket..Xlnt Cond..w/all new hardware
=Naturally includes the gauges wire harness..
=Bottom shifter panel has two minor cig spots
although looks very presentable. .
Cleaned up ready to install !!
Last Stripped one on eBay 212.00
and semi complete one missing parts 248.00...
I will not need it as I will be hauling around my G/Kidz
2 at a time..and want the foot room..

Thanx Rx


Attached image(s)

Posted by: pilothyer Feb 16 2009, 10:07 PM

Interested....PM Sent...Will call ....Jerry

Posted by: 914runnow Feb 17 2009, 09:28 PM

Still >>>>>Available<<<<
Interested Party= Went another direction...

Posted by: 914runnow Feb 20 2009, 06:33 PM

Last Shot Before Ebay....
>>>>>>I will include Freight..(parcel post)...to Cont. USA only
Canada etc. is additional....
It Is Boxed Ready to Ship...
Questions please contact..
Thanx Rx