Printable Version of Topic

Posted by: bdstone914 Feb 20 2009, 12:37 AM

Here is some of the parts I have had chemically stripped and replated in zinc. If you don't see something hear, PM me as I probably have it. Shipping is 5 dollars. orders over $50 get FREE SHIPPING! Also, I will buy back your used hardware. I can not offer that much for it as I am keeping the selling prices as low as I can.

Available quantities updated 3/6/09
New parts added.

Front trunk upper latches $25 each.
http://img26.imageshack.us/my.php?image=dscf0840.jpg
http://g.imageshack.us/img26/dscf0840.jpg/1/

Two pair of inner door latches $50 per pair or $30 each.
http://img22.imageshack.us/my.php?image=dscf0841.jpg

http://img21.imageshack.us/my.php?image=dscf0842.jpg
http://g.imageshack.us/img21/dscf0842.jpg/1/
Emergency brake ratchet part $10 each one available

http://img11.imageshack.us/my.php?image=dscf0826em4.jpg

Stub Axle castle nuts $25 per pair.
http://img9.imageshack.us/my.php?image=dscf0828js7.jpg

Emergency brake cable, equalizer cable, and bracket $30 each
Three available. Bottom clip not included.
http://img10.imageshack.us/my.php?image=dscf0827mq1.jpg

http://img11.imageshack.us/my.php?image=dscf0790qf8.jpg
More getting plated SOLD OUT
1.7, 1.8, 2.0 Fuel Injector rails. 2 pair Available $15


http://img10.imageshack.us/my.php?image=dscf0793jc0.jpg
SOLD OUT Getting more plated
Complete set of CV hardware. 1 sets available. $25 a set


http://img9.imageshack.us/my.php?image=dscf0794xk4.jpg
Small Air Box Clips, $2.50 each

http://img10.imageshack.us/my.php?image=dscf0799xp2.jpg
Rear Trailing arm shims to set rear camber. set of two 2mm, two 4mm. $25 set, 1 set available. Many 4 mm shims available

http://img9.imageshack.us/my.php?image=dscf0809rj9.jpg
Sold out of latches with new bushings. I have good used bushings and will have new bushings in one week.
Taking orders
Rebuilt upper rear trunk latches with new Delrin bushings. $25 each.


http://img8.imageshack.us/my.php?image=dscf0811dg6.jpg
Temporally sold out.
Complete set of rear transmission hardware. 1 set available $25 dollars a set


http://img6.imageshack.us/my.php?image=dscf0819pj1.jpg
Getting more palted
Taking orders
Front strut mounting hardware.1 set needed per car. $10 without bolts. several sets available w
UPDATE! more parts!

http://img25.imageshack.us/my.php?image=dscf0777mb0.jpg
Front Trunk lower latch. 2 Different styles. I believe the one on the right is from early years and correct for a 6. $25 each.

http://img17.imageshack.us/my.php?image=dscf0786hu9.jpg
Engine Lid Latch. $15 each.

http://img16.imageshack.us/my.php?image=dscf0788ju1.jpg
Tranny Plate. $25. Only one available.

http://img15.imageshack.us/my.php?image=dscf0789mp8.jpg
SOLD
Tortion bar adjusters/caps. $20 per pair.[/s]

http://img24.imageshack.us/my.php?image=dscf0792xv0.jpg
NLA Gas Tank Strap hardware. $15 No straps sorry.

http://img23.imageshack.us/my.php?image=dscf0795ql0.jpg
Front Headlight hardware plates. $7.50 per pair. Only silver available.

http://img22.imageshack.us/my.php?image=dscf0802ug3.jpg
Pedal Board Rubber stop holder. $10 each.


http://img21.imageshack.us/my.php?image=dscf0803ad2.jpg
from Left to right, Brake reservoir strap, $15, 70-74 Fuel pump bracket $10, Fan mounted coil straps $10. several coil straps available.

http://img23.imageshack.us/my.php?image=dscf0808be3.jpg
Spare Tire hold down hardware. $11 for the set. There sets available.

http://img14.imageshack.us/my.php?image=dscf0838mo2.jpg
Heater blower clamps for engine compartment fan $10

http://img11.imageshack.us/my.php?image=dscf0826mb1.jpg

SOLD
Fuel injector hold downs. $15 for a set of four. One is plated in flat zinc the others are bright zinc.
http://img10.imageshack.us/my.php?image=dscf0829kp3.jpg
S branch brackets. No gaskets. $5 each.

http://img9.imageshack.us/my.php?image=dscf0833ey0.jpg
http://img10.imageshack.us/my.php?image=dscf0834hv7.jpg
Traling arm L shaped thingies. $5 per pair Three gold three silver.

http://img9.imageshack.us/my.php?image=dscf0835kw4.jpg
Brake reservior strap. $15. Near perfect. Silver

http://img6.imageshack.us/my.php?image=dscf0837bp2.jpg
Ball joint retainer clips $15 per pair

Reasonable offers accepted on package deals.

Preferred payment method is Paypal to BDStone914@aol.com.
Checks accepted to
Bruce Stone
11276 Ramway Rd
Riverside CA 92505


Combined shipping for US will be just $5 dollars. Shipping at cost to others countries.
25% discount and free shipping on orders over $100.

Posted by: koozy Feb 20 2009, 02:03 AM

Them are some might fine looking parts, Bruce.

Posted by: jesiv Feb 20 2009, 08:54 AM

Bruce,

Front strut mounting hardware. 2 sets available. $15 set complete $10 without bolts. several sets available without bolts.

Do I need one or two sets to do the front?

Regards,

James

Posted by: bdstone914 Feb 20 2009, 09:16 AM

QUOTE(jesiv @ Feb 20 2009, 06:54 AM)

Posted by: jeeperjohn56 Feb 20 2009, 09:34 AM

Hey Bruce, I'll take a set of the strut mounting with bolts. also the trans mounts, would that be $5.00 sh for both? will send paypal John

Posted by: JRust Feb 20 2009, 12:06 PM

I'll take one set of 2.0 FI rails
One set of the CV hardware.
One set of the upper front strut mounts with Bolts!
How do you want the $55 ? Paypal or check in the mail?

Posted by: bdstone914 Feb 20 2009, 01:00 PM

UPDATE! more parts!

Posted by: jesiv Feb 20 2009, 01:58 PM

Bruce,

I'll take the Front strut mounting hardware.1 set needed per car. $15 set complete


Regards,

James

Posted by: biosurfer1 Feb 20 2009, 02:17 PM

any chance you have the engine bar (sideshift) mounting hardware that goes through the suspension ears?

Posted by: Heeltoe914 Feb 20 2009, 02:19 PM

Bring up a box of stuff when you get the cluster done. Looks great as always.

Posted by: Rob914 Feb 21 2009, 07:02 AM

Bruce,

I will take a set of the rear trailing arm shims and the gas tank strap hardware.

I am also interested in a set of fuel injector rails. From the picture it appears that the two sets you have may be different. If they are different, do you have a set that originally came with a 1971 1.7? Please let me know and I will send payment.

Thanks,
Rob

Posted by: bdstone914 Feb 21 2009, 10:33 AM

QUOTE(Rob914 @ Feb 21 2009, 05:02 AM)

Posted by: Nor.Cal.914 Feb 21 2009, 01:22 PM

Is the spare tire hold down and the clutch pedal rubber stop holder still available? Does the pedal stop come with the rubber in it? Please let me know. Thanks
-Chris

Posted by: bdstone914 Feb 21 2009, 01:53 PM

QUOTE(Nor.Cal.914 @ Feb 21 2009, 11:22 AM)

Posted by: Nor.Cal.914 Feb 21 2009, 06:51 PM

I will take a spare tire hold down set and if you have a good piece of rubber for the pedal stop, I will take one of those as well. Is shipping $5 for everything? Please let me know. Thanks
-Chris

Posted by: harlenl Feb 21 2009, 09:59 PM

Hey Bruce, sent you a PM for a trunk latch

Posted by: bdstone914 Feb 23 2009, 01:14 AM

QUOTE(bdstone914 @ Feb 19 2009, 10:37 PM)

Posted by: jim_hoyland Feb 24 2009, 07:12 PM

Bruce usually attends the G & R swapmeet each year in April; his inventory is worth looking at when rebuilding or just upgrading parts on a 914.

Posted by: bdstone914 Feb 24 2009, 09:56 PM

QUOTE(jim_hoyland @ Feb 24 2009, 05:12 PM)

Bruce usually attends the G & R swapmeet each year in April; his inventory is worth looking at when rebuilding or just upgrading parts on a 914.

Posted by: Bucci Feb 24 2009, 10:44 PM

Hello Bruce,

I will take the rear transmission hardware and please bring it to the swap in Anaheim, Ca.....

Best Marc
619-726-9012

Posted by: watsonrx13 Feb 25 2009, 05:25 AM

Bruce, PM sent yesterday....

-- Rob

Posted by: bdstone914 Mar 1 2009, 11:15 AM

Bump and update for March
I will be at the March 8 swap meet at the Phoenix Club in Anaheim and can bring parts there for pickup. I am taking more part in this week and hop to have them back for the swap meet. If you do not see what you need ask me. I have tone of parts for 914's and have 8 parts cars

Posted by: zonedoubt Mar 1 2009, 04:59 PM

QUOTE(bdstone914 @ Feb 19 2009, 10:37 PM)

Posted by: bdstone914 Mar 6 2009, 09:02 AM

Bumpo for new parts added. I will b at the Porsche swap meet March 8 at the Phoenix Club in Anaheim CA with all of the plated part and more. I have tons of 914 parts and 9 parts cars. Contact me with any requests.

Posted by: johnnie5 Mar 24 2009, 10:20 AM

I bought L & R door strikes and a upper rear trunk post/latch.... Awesome work Bruce, thanks!