Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: Lots of seals, boots, etc for my 2.0

Posted by: 914rrr Mar 16 2009, 02:47 PM

Since I recentedly removed the turbo from my 2.0, I wanted to replace lots of little stuff while I have the engine out and the sheet metal off. Stuff I am looking for includes;

1. gray injector boots
2. black injector boots
3. boot for cold start valve
4. boot for manifold temp sensor
5. heater control cable and boots
6. injector seals
7. drivers side wiper arm in excellent to NOS condition
8. stainless steel alan head screws for engine sheet metal - I have some existing alan screws on the sheet metal that are knurled, are these Euro, aircraft, or ???
9. boot for MPS and distributor points
10. possibly a complete '73 2.0 injector wiring harness
11. boot for trans reverse switch
12. rubber seal for oil pressure switch
13. rubber seal for head temp sensor
14. boot for transmission reverse switch
15. 3 rubber seals for the rear engine sheet metal
16. heater hose seals
17. Viton push rod tube seals
18. gaskets for throttle body and cold start valve
19. intake manifold gaskets
20. injector seals
21. 2.0 muffler gaskets
22. copper head to exhaust pipe gaskets


Any help with sources for these parts would be appreciated...other than AA.

Thanks!
Rob
865-463-2575

Posted by: sixaddict Mar 16 2009, 03:35 PM

Rob:
914rubber.com
Full seal set for engine compartment either on ebay or from him directly around $70 + or - a few $$ . Works well.
TOT

Posted by: Mikey914 Mar 16 2009, 10:54 PM

I've got the engine bay seals, heater hoses and stainless allen screws, as well as many other seals. I've got a lising in member vendors section. Just let me know what you needany your email address I'll send you a invoice via paypal.

-Mark

http://www.914world.com/bbs2/index.php?showtopic=91029

Posted by: MrKona Mar 16 2009, 11:15 PM

I've had good luck with busdepot.com.

Heater cable boot: P/N 113-711-691, $1.66

Oil Pressure switch boot: P/N 021 119 957, $7.53

J-tube tin grommet: P/N 021 119 627 B, $6.31

It's been "fun" typing part numbers from the Porsche parts catalog into their search engine to see what pops up. They have had a few items listed as available on their website that end up being NLA, but I've purchased the three items above from them.


Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)