Printable Version of Topic

Posted by: markr0 Mar 23 2009, 10:26 PM

i have a front undermount sway bar for a 914 and i need the coulpler mounts and drop linkage and bushing to make a complete set .... Ideas ? or help thanks

Posted by: bdstone914 Mar 23 2009, 11:55 PM

The side brackets are available new from Stoddard but are not cheap, about $98 each as I recall.
Bruce

Posted by: 914dave Mar 24 2009, 04:18 AM

I have the outer bushing cups. $10 plus shipping. AA has the inner plates new $11 each.
Dave

Posted by: johnnie5 Mar 24 2009, 05:14 PM

Performance Products will sell you Weltmiester pieces for either front or rear.

Posted by: markr0 Mar 24 2009, 07:55 PM

where r they located and is that their web site??? thanks for the help Rob

Posted by: megfourfun Mar 24 2009, 08:45 PM

I was looking for the same.
Can someone verify this...
http://www.automotion.com/product.asp?pf%5Fid=P903195&dept%5Fid=5027

Posted by: bdstone914 Mar 24 2009, 08:56 PM

Those are the bushings for the front drop links. A little pricey though. I think Pelican has them for about $6 each. You need four total. Also look for 91 front sway bar parts. Other than the drop links which are longer the other parts are the same on early 65-73 911and 912 cars.

Posted by: tyler Mar 28 2009, 01:42 PM

Not sure if this will help but I have a 20mm sway bar off a 911 front end that was leftover when I put the 911 brakes on my 914. I couldn't use it because it interfered with my cooling hoses for the V8.

"i have a front undermount sway bar for a 914 and i need the coulpler mounts and drop linkage and bushing to make a complete set .... Ideas ? or help thanks"

Posted by: markr0 Mar 28 2009, 05:10 PM

hey thanks for the reply but unforunately they will not work thanks ....... ty


rob