914World.com [Powered by Invision Power Board]

Posted by: stevekh44 Apr 5 2009, 10:14 AM

I am selling the following parts from my 914 autocross car. I am taking the car to the next level of preparation and will not be using these parts.

Front Struts - Koni #8641-1107

Rear Shocks - Koni #8241-1050 (Could probably stand to be repainted before installing.)

These shocks and struts are in very nice condition. They are gas charged and are externally adjustable.

I am also selling a very nice set of strut housings that have been modified by Tangerine Racing Products. The spindles have been raised 22 mm.

I have all of these parts currently listed on Ebay if you would like to see a picture. Or just let me know and I can email them to you.

I will sell everything to a forum member for $500 plus shipping or trade for a set of monoball camber plates that can be used with a 5/8" mounting diameter. Stock mounting uses an 18mm (.708") mount.

Thanks

Posted by: pktzygt Apr 5 2009, 10:18 AM

Very Interested,
I'll send you a PM.

Posted by: Nor.Cal.914 Apr 5 2009, 07:01 PM

How much for just the strut housings alone? Would you be willing to separate? Are they 3 or 3.5 inch spacing for the calipers? Please let me know. Thanks!
-Chris

Posted by: koozy Apr 5 2009, 08:43 PM

Hey Steve,

I'm interested in the struts too, if Chris passes and you would sell them alone.

Posted by: stevekh44 Apr 6 2009, 09:06 PM

I would like to get $175 for the housings, $175 for the front struts and $150 for the rear shocks.

I am willing to sell the strut housings separately. I really would like to sell the Koni's together.

Thanks,
Steve

Posted by: Nor.Cal.914 Apr 7 2009, 04:37 PM

I'll pass on the strut housings. Thanks
-Chris

Posted by: charliew Apr 9 2009, 11:04 AM

Do the koni strut housings only use koni struts? Or will bilsteins fit in them? Has anyone siad they would take it all. I am interested if this is 3 inch caliper and 911 spindles.

I found the ebay add, says 914 spindles.

Posted by: stevekh44 Apr 10 2009, 04:39 AM

Sorry, they are 914 spindles.

QUOTE(charliew @ Apr 9 2009, 09:04 AM)

Do the koni strut housings only use koni struts? Or will bilsteins fit in them? Has anyone siad they would take it all. I am interested if this is 3 inch caliper and 911 spindles.

I found the ebay add, says 914 spindles.

Posted by: rnellums Feb 3 2010, 11:39 AM

Are the koni front struts still available?

Posted by: stevekh44 Feb 3 2010, 06:11 PM

Sorry they are sold.

QUOTE(rnellums @ Feb 3 2010, 09:39 AM)