Printable Version of Topic

Posted by: bdstone914 Apr 7 2009, 10:40 PM

I just got back a large batch of plated parts. Here are some that I have had a chance to sort and photograph. Shipping is $5 for as many part as will fit in a flat rate USPS envelope or $10 for as many parts as will fit in a flat rate box. I often have more sets of parts than are shown in the pictures.

Gas cap $20
http://img113.imageshack.us/my.php?image=dscf0954.jpg

Pair of valve covers $25
http://img379.imageshack.us/my.php?image=dscf0952.jpg

Trans Pulley bracket $15
http://img113.imageshack.us/my.php?image=dscf0950.jpg

Front hood springs $20
http://img159.imageshack.us/my.php?image=dscf0948.jpg

Gas tank straps $20
http://img144.imageshack.us/my.php?image=dscf0947.jpg

Strut hold down plates, bolts, new washers $20 /2 sets
http://img144.imageshack.us/my.php?image=dscf0945.jpg

Front upper hood latches $20
Front lower hood latches $20
http://img509.imageshack.us/my.php?image=dscf0942.jpg
Rear trunk upper latch with metal slider $25

Ball joint hardware $25
http://img26.imageshack.us/my.php?image=dscf0965v.jpg

2 Stub axle Castle nuts with washers $25
http://img513.imageshack.us/my.php?image=dscf0964.jpg

Torsion bar adjusters with screws $20
http://img227.imageshack.us/my.php?image=dscf0962.jpg

Brake reservoir straps $15 each
http://img26.imageshack.us/my.php?image=dscf0959d.jpg

Coil brackets for fan shroud mount $10
http://img520.imageshack.us/my.php?image=dscf0957.jpg

Coil brackets for cylinder tin mount $7
http://img13.imageshack.us/my.php?image=dscf0958f.jpg


Engine lid latches $10
http://img14.imageshack.us/my.php?image=dscf0956h.jpg

CV joint bolts, clips and new Schnorr washers $20 per set for both axles
http://img14.imageshack.us/my.php?image=dscf0967.jpg

Posted by: jeeperjohn56 Apr 7 2009, 11:30 PM

Hey Bruce, Did you get any trans mounts done?still waiting for mine and brake clips.John

Posted by: kconway Apr 9 2009, 08:59 AM

Bruce,
I need a set of those torsion bar adjusters to go along with the A-arms I got from you.

I also need one LARGE aircleaner latching clip.

Kevin

Posted by: charliew Apr 9 2009, 09:59 AM

Nice parts and good prices. Are these cadmium or copy cad plated?

Posted by: bdstone914 Apr 9 2009, 06:18 PM

They are glod zinc plating. I do not know of any placed still doing cad plating with te enviornmental issues.

Posted by: charliew Apr 9 2009, 08:16 PM

Thats ok I think that is really a better coating. Caswell calls it a copy cad. Will you have these parts later on I probably will want some at a later date.