Need a passenger side non-retractable seatbelt assembly - this means the release button would be on the lower side/bottom of the buckle when installed on the passenger side of the center tunnel.
Condition of the webbing is not a concern - just need the harware (including the black plastic cover on the bayonet/male side.
Will buy both the driver and passenger sides if you have them.
ALSO - if anyone has the early optional center seat cushion seat belt, I really need one of these as well.
Thanks!!!
Scott S
Scott, I probably have a set. My Steel-Roof car is leaving tomorrow, so I will have some storage relief and I'll have chance to look
T.C.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)