Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: Front Sway Components

Posted by: Rav914 May 14 2009, 12:10 PM

Need A pair of the exterior caps pictured. The ones that hold the bushings around the actual bar. Thanks,

Attached thumbnail(s)

Posted by: yeahmag May 14 2009, 12:12 PM

I have an aftermarket set (not sure what brand) you can have for cheap. Let me know...

Posted by: yeahmag May 14 2009, 12:15 PM

Actually, if I had to guess they were Weltmeister gaughing by this picture:

http://www.pelicanparts.com/catalog/images/suspension_parts/welt_swaybar.jpg

Notice they aren't "stepped" like stock ones.

Posted by: Rav914 May 14 2009, 12:17 PM

Will they work with the stock bushings?

Posted by: yeahmag May 14 2009, 12:21 PM

Definitely not with stock bushings, but I would think Weltmeister or somebody could sell you the correct ones. Check with the vendors first...

Posted by: hwgunner May 14 2009, 04:00 PM

we are digging up a couple right now. i will pm you in just a little bit.

Posted by: bdstone914 May 15 2009, 06:43 AM

QUOTE(Rav914 @ May 14 2009, 10:10 AM)

Need A pair of the exterior caps pictured. The ones that hold the bushings around the actual bar. Thanks,

Stoddard carries new ones for about $74 each. Look them us as an early 911 part. I bough some a few months ago from them for $30 each.

Posted by: Rav914 May 15 2009, 10:20 AM

Thanks for the tip. I checked them out.

901-343-754-01 at $73.83 each. Yikes.

Posted by: Rav914 May 17 2009, 07:28 AM

Found one. Just need a single now.