Printable Version of Topic

Posted by: badm May 26 2009, 08:51 PM

This is a NEW muffler!, I had it made for my 914/6 and have now gone in another direction for the exhaust. I placed this on E-bay for one week now back on 914 world. I am looking for $200.00 or B/O + shipping.
Thanks Ben

Posted by: pete-stevers May 27 2009, 11:56 PM

great deal..i would nab it but i have a few to many mufflers...so
ba-bump

Posted by: mojorisen914 May 28 2009, 12:32 AM

Damn, I just bought one of those from Triad.....oh well.

Posted by: MikeSpraggi May 28 2009, 05:01 PM

Are these mufflers muffled at all or are they straight-thrus? In other words are they really loud? Can they be used on the street?

Posted by: badm May 29 2009, 05:29 AM

This is A re-print from the Triad web site,the one for sale is the 90db unit.


In house muffler test, Caney Engineering, Ealing, England

Engine: 3.2 liters, 10.8:1 pistons, flycut for Solex (901) cam, 46 mm
Webers with 38mm venures, 1 5/8" Triad headers, flowed heads, Euro
(centifugal) distributor recurved, K&N air cleaners, MSO ignition, Amsoil
10-40 synthetic oil.

Baseline was determined by established maximum horsepower with 24" open
megaphones attached. This occurred @6100 rpm with a reading of 289.
Muffler tests were done at the same rpm with no changes except for final
exhaust.

Horsepower
----------
Open tapered megaphones 289 off meter
Triad dual outlet track unit 285 100 Db
Triad dual outlet 90 dB unit 283 88 Db
Leistritz (factory sport) 2 outlet 279 103 Db
Triad single outlet with crossover 279
Borla 277
Super trap (disced to 95 dB) 275
Flowmaster 273
Bischoff (factory stock) 272 84 Db
Bursch Steelpak(supplied with SSI systems) 270
Ansa (4 pipe) 269
Supersprint 267

Notes:
On the units where decibel readings were taken, they were
obtained by methods outlined in California DER Supplement 82, Part III,
17-18.76
The possibility exists that slight differences of comparatives could
occur with engines/headers of a different configuration or horsepower
band.

Posted by: badm May 31 2009, 06:55 AM

Bump.

Posted by: badm Jun 4 2009, 05:17 PM

"Bump"

Posted by: badm Jun 14 2009, 11:13 AM

New Price!!!!!

Posted by: Matt Romanowski Jun 14 2009, 08:05 PM

What size motor did you have this on? What size was it built for?

Posted by: badm Jun 14 2009, 10:01 PM

This will work on a 2.4 to 3.0 it has never been on a car. I was going to use it on A 2.7. Thanks Ben

Posted by: Matt Romanowski Jun 15 2009, 10:12 AM

I'll take it. I'll send you a pm to arrange getting it.